Rohm Semiconductor 2SK3541T2L

2SK3541T2L Overview
The maximum input capacitance of this device is 13pF @ 5V, because the input capacitance of an op amp is defined as the difference between the input terminals with one input grounded.Continuous drain current (ID) is the maximum continuous current (ID) the device can conduct, and it is 100mA.When VGS=30V, and ID flows to VDS at 30VVDS, the drain-source breakdown voltage is 30V in this device.Before drain current conduction can begin, the device's turn-off delay time must be charged up to full capacitance. This value is 80 ns.MOSFETs exhibit Drain-to-Source Resistance when a specific gate-to-source voltage (VGS) is applied to bias them into the on state, and this device's resistance is 5Ohm.During device turn-on, the input capacitance must be charged for a period of time before drain current conduction can begin, so its delay time is 15 ns seconds.Single MOSFETs transistor is the voltage across the gate-source terminal of a transistor that determines the gate-source voltage, VGS.This transistor's threshold voltage is 1.5V volts, which indicates that a transistor is ready to perform any of its operations at that voltage.The drain-to-source voltage (Vdss) of this transistor needs to be at 30V in order to operate.Using drive voltage (2.5V 4V), this device helps reduce its power consumption.

2SK3541T2L Features
a continuous drain current (ID) of 100mA
a drain-to-source breakdown voltage of 30V voltage
the turn-off delay time is 80 ns
single MOSFETs transistor is 5Ohm
a threshold voltage of 1.5V
a 30V drain to source voltage (Vdss)


2SK3541T2L Applications
There are a lot of ROHM Semiconductor
2SK3541T2L applications of single MOSFETs transistors.


Micro Solar Inverter
DC/DC converters
Power Tools
Motor Drives and Uninterruptible Power Supples
Synchronous Rectification
Battery Protection Circuit
Telecom 1 Sever Power Supplies
Industrial Power Supplies
PFC stages, hard switching PWM stages and resonant switching
PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,