STMicroelectronics ST62T60CB6

Description
The ST62T60CB6 device is a low-cost member of the ST62xx 8-bit HCMOS microcontroller family, which is intended for applications with low to medium complexity. A common core is surrounded by a number of on-chip peripherals, which form the basis for all ST62xx devices. The erasable EPROM variant of the ST62T60C device, the ST62E60C, can be used to simulate the ST62T53C, ST62T60C, and ST62T63C devices, as well as their corresponding ST6253C, ST6260B, and ST6263B ROM counterparts. Devices using OTP and EPROM have the same functionality. The ROM-based versions provide the same functionality, allowing users to select the options listed in the OTP/EPROM versions' programmable option byte as ROM options. OTP devices are the best option in a variety of applications when frequent code updates, various code versions, or last-minute programmability are required since they provide all the benefits of user programmability at a cheap cost. These small, inexpensive devices have a Timer with an 8-bit counter and a 7-bit programmable Prescaler, an 8-bit Auto-Reload Timer, EEPROM data capability (except for the ST62T53C), a serial port communication interface, an 8-bit A/D Converter with 7 analog inputs, and a Digital Watchdog timer, making them suitable for a variety of industrial, automotive, and household appliance applications.

Features
6 I/O lines can sink up to 30mA to drive LEDs or TRIACs directly
8-bit Timer/Counter with 7-bit programmable prescaler
8-bit Auto-reload Timer with 7-bit programmable prescaler (AR Timer)
Digital Watchdog
Oscillator Safe Guard
Low Voltage Detector for Safe Reset
8-bit A/D Converter with 7 analog inputs
8-bit Synchronous Peripheral Interface (SPI)
On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network
User configurable Power-on Reset
One external Non-Maskable Interrupt
ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port).
3.0 to 6.0V Supply Operating Range
8 MHz Maximum Clock Frequency
-40 to 125°C Operating Temperature Range
Run, Wait and Stop Modes
5 Interrupt Vectors
Look-up Table capability in Program Memory
Data Storage in Program Memory: User selectable size
Data RAM: 128 bytes
Data EEPROM: 64/128 bytes (none on ST62T53C)
User Programmable Options
13 I/O pins, fully programmable as:
– Input with pull-up resistor – Input without pull-up resistor – Input with interrupt generation – Open-drain or push-pull output – Analog Input

Applications
Automotive
Appliance
Industrial applications
Temperature sensing and controlling devices
Process control devices