SN74BCT757DWRE4

SN74BCT757DWRE4 Overview
There is a neat 20-SOIC (0.295, 7.50mm Width) package used in buffer. A Tape & Reel (TR) external packaging is used for this buffer. The external packaging used in this logic IC is the Surface Mount external packaging. This is a typical Buffer, Non-Inverting logic integrated circuit with a wide range of applications. There's a 4.5V~5.5V supply voltage for this logic IC. This automotive buffer is capable of working through 0°C~70°C TA. This buffer IC has a - 64mA high and low logic state output current. There are Open Collector outputs that digital buffer can handle. A total of 2 elements are used. 74BCT series devices are included in this network transceiver. 20 terminations with different functions are available on this transceiver. An input voltage of 5V is required. BCT/FBT family part. With the electrical part, 20 pins are set. Surface Mount applications are suitable for it. There are 20 pins on digital buffer. The bus transceiver has 2 ports. For each element, there are 4 bits. For other related electronic components, you can search 74BCT757. In particular, automotive buffer is a type of Bus Driver/Transceivers. Power supplies with a 5V volt rating are recommended. The package is usually shaped like a TAPE AND REEL. For better service, buffer includes TRISTATE CONTROL INPUT ACTIVE HIGH FOR ONE FUNCTION. The logical driver has the ability to output 3 signal lines at the same time. Signal transmission is more cost-effective with its 8 lines level input capability. ENABLE LOW/HIGH control technology allows the logical driver to start up.

SN74BCT757DWRE4 Features
Bus Driver/Transceivers
TRISTATE CONTROL INPUT ACTIVE HIGH FOR ONE FUNCTION


SN74BCT757DWRE4 Applications
There are a lot of Texas Instruments
SN74BCT757DWRE4 Buffers & Transceivers applications.


Wireless modems
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC