Texas Instruments SN74LV541ATDW

Name: SN74LV541ATDW
Brand: Texas Instruments
SKU: 6407344-SN74LV541ATDW
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: SN74LV541ATDW

Manufacturer:: Texas Instruments

Ventron No:: 6407344-SN74LV541ATDW

Description:: 8-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

ECAD Model:

Datasheet:: sn74lv541at

Specifications

Texas Instruments SN74LV541ATDW technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments SN74LV541ATDW.

Technology family
LV-AT
Supply voltage (min) (V)
4.5
Supply voltage (max) (V)
5.5
Number of channels
8
IOL (max) (mA)
16
Supply current (max) (μA)
20
IOH (max) (mA)
-16
Input type
TTL-Compatible CMOS
Output type
3-State
Features
Balanced outputs
Rating
Catalog
Operating temperature range (°C)
-40 to 125

Description

The SN74LV541AT is designed for 4.5-V to 5.5-V V_CC operation. The inputs are TTL-voltage compatible, which allows them to be interfaced with bipolar outputs and 3.3-V devices. The device also can be used to translate from 3.3 V to 5 V.

This device is ideal for driving bus lines or buffer memory address registers. It features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.

The 3-state control gate is a two-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Certification