STMicroelectronics STM32F407VGT6

STM32F407VGT6 Overview The STM32F407VGT6 Microcontroller is based on the high-performance ARM Cortex-M4 32-bit RISC core, running at up to 168MHz.  STM32F407VGT6 Microcontroller also executes a full set of DSP instructions, and includes a memory protection unit to enhance application security. The STM32F407VGT6 incorporates high-speed embedded memory (flash memory up to 1Mbyte, up to 192Kbyte SRAM), up to 4Kbyte spare SRAM, and an enhanced range of input For output, external devices are connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
The mounting type for this particular device is surface mount, which means that it can be directly attached to the surface of a circuit board. With a pin count of 100, it offers a sufficient number of pins for various connections. In terms of I/O, there are 82 available, allowing for a wide range of input and output options. The voltage supply range is from 1.8V to 3.6V, providing flexibility in power requirements. The program memory type is FLASH, which allows for easy reprogramming and updating. The data converter is an A/D 16x12b and D/A 2x12b, ensuring accurate and high-resolution data conversion. A watchdog timer is included, providing an added level of security and reliability. Additionally, there are 16 ADC channels available for capturing analog signals. With a height of 1.45mm, this device is compact and suitable for space-constrained applications.
STM32F407VGT6 Microcontroller offers three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG).  
STM32F407VGT6 Features
Memories
Up to 1 Mbyte of Flash memory
Up to 192 4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
True random number generator
CRC calculation unit
2 × 12 digital-to-analog converters
3 × 12-bit, 2.4MSPS ADCs
32kHz oscillator for real time clock with calibration
4MHz to 26 MHz crystal oscillator
Clock, Reset and Power Management
debug mode
Flexible static memory controller supports compact flash, SRAM, PSRAM, NOR and NAND memories
Generic DMA controller, supporting FIFO and bursting.
Internal 16 MHz factory trimmed RC (1% accuracy)
Internal 32kHz RC with calibration
LCD parallel interface, 8080/6800 mode
Sleep, Stop and Standby Modes
Up to 136 fast I/Os, up to 84MHz
Up to 138 5V inputs and outputs
Up to 140 I/O ports with interrupt capability
Up to 15 communication interfaces
Up to 17 timers
VBAT powered real time clock, 20 x 32 bit backup power

STM32F407VGT6 Applications Clock and Timing
Embedded Design and Development
Imaging
Video and Vision
Industrial
Motor Drive and Control
Multimedia
Portable Equipment
Sensing and Instrumentation
Medical
Motor drive and application control
Medical equipment
Industrial applications: PLC, inverters, circuit breakers
Printers, and scanners
Alarm systems, video intercom, and HVAC
Home audio appliances