STMicroelectronics STM32F103ZET6

STM32F103ZET6 Description The STM32F103ZET6 has a high-performance ARM? Cortex?-M3 32-bit RISC CPU running at 72 MHz, high-speed embedded storage (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and a large number of upgraded I/Os and peripherals connected to two APB buses. Three 12-bit ADCs, four general-purpose 16-bit timers, and two PWM timers are included in the STM32F103ZET6 microcontroller, as well as standard and advanced communication interfaces such as up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, a USB, and a CAN. The STM32F103xC/D/E high-density performance line family operates from a 2.0 to 3.6 V power source and operates in the temperature range of –40 to 105 °C. Low-power applications can be designed thanks to a wide collection of power-saving modes.
The STMicroelectronics brand offers a wide range of electronic components, including the Embedded - Microcontrollers chip. This chip falls under the Embedded - Microcontrollers category and has a base part number of STM32F103. It features a core processor of ARM® Cortex®-M3 and a program memory type of FLASH. With a supply voltage-min (Vsup) of 2V and an operating temperature range of -40°C~85°C TA, this chip is designed to withstand harsh conditions. Additionally, it offers various connectivity options such as CANbus, I2C, IrDA, LINbus, SPI, UART/USART, and USB. It also has 2 I2C channels and supports DMA channels. Furthermore, this chip is ROHS3 compliant, making it environmentally friendly.
72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
Single-cycle multiplication and hardware division
Memories
256 to 512 Kbytes of Flash memory
up to 64 Kbytes of SRAM
Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
LCD parallel interface, 8080/6800 modes
Clock, reset, and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC with calibration
32 kHz oscillator for RTC with calibration
Low power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
3 × 12-bit, 1 μs A/D converters (up to 21 channels)
Conversion range: 0 to 3.6 V
Triple-sample and hold capability
Temperature sensor
2 × 12-bit D/A converters
DMA: 12-channel DMA controller
Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
Debug mode
Serial wire debug (SWD) & JTAG interfaces
Cortex?-M3 Embedded Trace Macrocell?
Up to 112 fast I/O ports
51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Up to 11 timers
Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
2 × watchdog timers (Independent and Window)
SysTick timer: a 24-bit down counter
2 × 16-bit basic timers to drive the DAC
Up to 13 communication interfaces
Up to 2 × I2C interfaces (SMBus/PMBus)
Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
CAN interface (2.0B Active)
USB 2.0 full speed interface
SDIO interface
CRC calculation unit, 96-bit unique ID
ECOPACK? packages

STM32F103ZET6 Applications Data Acquisition
Low-cost Sensor integration
Low power Embedded devices
Small data retention related purposes