NXP USA Inc. MC9S08GB60ACFUE

MC9S08GB60ACFUE Description
The MC9S08GB60, a microcontroller with a bit size of 8, was published in 2005. It has a terminal position of QUAD and a terminal pitch of 0.5mm, making it suitable for compact and space-constrained applications. The supply voltage range for this microcontroller is 2.08V to 3.6V, with a nominal supply voltage of 3V. This means that it can operate within a wide range of power supply voltages, providing flexibility for various system designs. Additionally, the MC9S08GB60 also has an analog-to-digital converter (ADC) integrated, making it capable of converting analog signals into digital data. However, it does not have any direct memory access (DMA) channels, which may limit its performance in certain applications. Overall, the MC9S08GB60 is a versatile microcontroller that offers a balance of features and compactness.

MC9S08GB60ACFUE Features
Inter-integrated circuit bus module to operate up to 100 kbps (IIC)
One 3-channel and one 5-channel 16-bit timer/pulse width modulator (TPM) modules with selectable input capture, output compare, and edge-aligned PWM capability on each channel. Each timer module may be configured for buffered, centered PWM (CPWM) on all channels (TPMx).
8-pin keyboard interrupt module (KBI)
16 high-current pins (limited by package dissipation)
Software selectable pullups on ports when used as input. Selection is on an individual port bit basis. During output mode, pullups are disengaged.
Internal pullup on RESET and IRQ pin to reduce customer system cost
Up to 56 general-purpose input/output (I/O) pins, depending on package selection
64-pin low-profile quad flat package (LQFP)
On-chip in-circuit programmable flash memory:
— Fully read/write functional across voltage and temperature ranges — Block protection and security options On-chip random-access memory (RAM) (see Table 1-1 for device specific information)
8-channel, 10-bit analog-to-digital converter (ATD)
Two serial communications interface modules (SCI)
Serial peripheral interface module (SPI)
Multiple clock source options:
— Internally generated clock with ±0.2% trimming resolution and ±0.5% deviation across voltage — Crystal — Resonator — External clock

MC9S08GB60ACFUE Applications
Light sensing & controlling devices
Temperature sensing and controlling devices
Fire detection & safety devices
Industrial instrumentation devices
Process control devices