.jpg)
Infineon Technologies IR21834STRPBF
- Part Number:
- IR21834STRPBF
- Manufacturer:
- Infineon Technologies
- Ventron No:
- 3735155-IR21834STRPBF
- Description:
- IC DRIVER HALF BRIDGE 14SOIC
- ECAD Model:
-
- Datasheet:
- IR21834STRPBF
Infineon Technologies IR21834STRPBF technical specifications, attributes, parameters and parts with similar specifications to Infineon Technologies IR21834STRPBF.
- Factory Lead Time12 Weeks
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case14-SOIC (0.154, 3.90mm Width)
- Number of Pins14
- Operating Temperature-40°C~150°C TJ
- PackagingTape & Reel (TR)
- Published1996
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)3 (168 Hours)
- Number of Terminations14
- Terminal FinishMatte Tin (Sn)
- Max Power Dissipation1W
- TechnologyCMOS
- Voltage - Supply10V~20V
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)NOT SPECIFIED
- Number of Functions1
- Supply Voltage15V
- Reflow Temperature-Max (s)NOT SPECIFIED
- Base Part NumberIR21834SPBF
- Output Voltage20V
- Max Output Current2.3A
- Nominal Supply Current1mA
- Power Dissipation1W
- Output Current1.9A
- Max Supply Current1.6mA
- Propagation Delay330 ns
- Input TypeInverting, Non-Inverting
- Turn On Delay Time35 ns
- Rise Time40ns
- Fall Time (Typ)20 ns
- Turn-Off Delay Time220 ns
- Rise / Fall Time (Typ)40ns 20ns
- Channel TypeIndependent
- Number of Drivers2
- Output Peak Current Limit-Nom2.3A
- Driven ConfigurationHalf-Bridge
- Gate TypeIGBT, N-Channel MOSFET
- Current - Peak Output (Source, Sink)1.9A 2.3A
- High Side DriverYES
- Logic Voltage - VIL, VIH0.8V 2.7V
- Turn Off Time0.33 μs
- High Side Voltage - Max (Bootstrap)600V
- Height1.4986mm
- Length8.7376mm
- Width3.9878mm
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
IR21834STRPBF Overview
Its 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number IR21834SPBF.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 14 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The maximum output current can amount to 2.3A.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.The output current supported by the device is 1.9A.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended that you keep the supply current at 1.6mA in order to achieve greater stabilMosfet gate driversy.The voltage it outputs is 20V.
IR21834STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR21834STRPBF Applications
There are a lot of Infineon Technologies IR21834STRPBF gate drivers applications.
High frequency line drivers
General Purpose 3-Phase Inverter
Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
Motor controllers
Isolated Supplies for Motor Control
Uninterruptible Power Supplies (UPS)
High-speed communications
DC/DC converters
Broadcast equipment
LCD/LCoS/DLP portable and embedded pico projectors
Its 14-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 10V~20V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number IR21834SPBF.In this case, Surface Mount indicates how the device is to be mounted.When designing, the device is configured with 14 pins.In addition, it is specifically designed to operate with a supply voltage of 15V.The maximum output current can amount to 2.3A.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.The output current supported by the device is 1.9A.1W dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended that you keep the supply current at 1.6mA in order to achieve greater stabilMosfet gate driversy.The voltage it outputs is 20V.
IR21834STRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
IR21834STRPBF Applications
There are a lot of Infineon Technologies IR21834STRPBF gate drivers applications.
High frequency line drivers
General Purpose 3-Phase Inverter
Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
Motor controllers
Isolated Supplies for Motor Control
Uninterruptible Power Supplies (UPS)
High-speed communications
DC/DC converters
Broadcast equipment
LCD/LCoS/DLP portable and embedded pico projectors
IR21834STRPBF More Descriptions
600 V half-bridge gate driver IC with programmable deadtime, SOIC 14N, RoHS
Tape & Reel (TR) IR21834SPBF Half-Bridge 1996 gate driver 40ns -40C~150C TJ 1.9A 2.3A 1W
IR2183 Series 600 V 1.9 A 20 V Supply Dual Output Half Bridge Driver - SOIC-14
Surface Mount Tape & Reel (TR) Active Gate Drivers ICs Inverting, Non-Inverting 2 600V V 14-SOIC (0.154, 3.90mm Width) IR21834SPBF Half-Bridge
Drivers IC; Device Type:IGBT/MOSFET; No. of Outputs:2; Output Voltage:620V; Output Current:2.3A; Power Dissipation, Pd:1W; Supply Voltage Min:10V; Supply Voltage Max:20V; Termination Type:SMD; Package/Case:14-SOIC; No. of Pins:14 ;RoHS Compliant: Yes
The IR2183(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.
600 V Half Bridge Driver IC with typical 1.9 A source and 2.3 A sink currents in 14 Lead PDIP package for IGBTs and MOSFETs. Also available in 14 Lead SOIC, 8 Lead SOIC, and 8 Lead PDIP. | Summary of Features: Floating channel designed for bootstrap operation; Fully operational to 600 V; Tolerant to negative transient voltage; dV/dt immune; Gate drive supply range from 10 to 20 V; Undervoltage lockout for both channels; 3.3 V and 5 V input logic compatible; Matched propagation delay for both channels; Logic and power ground /- 5 V offset; Lower di/dt gate driver for better noise immunity; Output source/sink current capability 1.4A/1.8A
Tape & Reel (TR) IR21834SPBF Half-Bridge 1996 gate driver 40ns -40C~150C TJ 1.9A 2.3A 1W
IR2183 Series 600 V 1.9 A 20 V Supply Dual Output Half Bridge Driver - SOIC-14
Surface Mount Tape & Reel (TR) Active Gate Drivers ICs Inverting, Non-Inverting 2 600V V 14-SOIC (0.154, 3.90mm Width) IR21834SPBF Half-Bridge
Drivers IC; Device Type:IGBT/MOSFET; No. of Outputs:2; Output Voltage:620V; Output Current:2.3A; Power Dissipation, Pd:1W; Supply Voltage Min:10V; Supply Voltage Max:20V; Termination Type:SMD; Package/Case:14-SOIC; No. of Pins:14 ;RoHS Compliant: Yes
The IR2183(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.
600 V Half Bridge Driver IC with typical 1.9 A source and 2.3 A sink currents in 14 Lead PDIP package for IGBTs and MOSFETs. Also available in 14 Lead SOIC, 8 Lead SOIC, and 8 Lead PDIP. | Summary of Features: Floating channel designed for bootstrap operation; Fully operational to 600 V; Tolerant to negative transient voltage; dV/dt immune; Gate drive supply range from 10 to 20 V; Undervoltage lockout for both channels; 3.3 V and 5 V input logic compatible; Matched propagation delay for both channels; Logic and power ground /- 5 V offset; Lower di/dt gate driver for better noise immunity; Output source/sink current capability 1.4A/1.8A
The three parts on the right have similar specifications to IR21834STRPBF.
-
ImagePart NumberManufacturerFactory Lead TimeMountMounting TypePackage / CaseNumber of PinsOperating TemperaturePackagingPublishedJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsTerminal FinishMax Power DissipationTechnologyVoltage - SupplyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageReflow Temperature-Max (s)Base Part NumberOutput VoltageMax Output CurrentNominal Supply CurrentPower DissipationOutput CurrentMax Supply CurrentPropagation DelayInput TypeTurn On Delay TimeRise TimeFall Time (Typ)Turn-Off Delay TimeRise / Fall Time (Typ)Channel TypeNumber of DriversOutput Peak Current Limit-NomDriven ConfigurationGate TypeCurrent - Peak Output (Source, Sink)High Side DriverLogic Voltage - VIL, VIHTurn Off TimeHigh Side Voltage - Max (Bootstrap)HeightLengthWidthREACH SVHCRoHS StatusLead FreeSupplier Device PackageSurface MountECCN CodeJESD-30 CodeQualification StatusOutput CharacteristicsOutput PolarityInput CharacteristicsHeight Seated (Max)View Compare
-
IR21834STRPBF12 WeeksSurface MountSurface Mount14-SOIC (0.154, 3.90mm Width)14-40°C~150°C TJTape & Reel (TR)1996e3yesActive3 (168 Hours)14Matte Tin (Sn)1WCMOS10V~20VDUALGULL WINGNOT SPECIFIED115VNOT SPECIFIEDIR21834SPBF20V2.3A1mA1W1.9A1.6mA330 nsInverting, Non-Inverting35 ns40ns20 ns220 ns40ns 20nsIndependent22.3AHalf-BridgeIGBT, N-Channel MOSFET1.9A 2.3AYES0.8V 2.7V0.33 μs600V1.4986mm8.7376mm3.9878mmNo SVHCROHS3 CompliantLead Free---------- -
--Through Hole8-DIP (0.300, 7.62mm)--40°C~150°C TJTube2000--Obsolete1 (Unlimited)----10V~20V------IR2107-------Inverting----150ns 50nsIndependent2-Half-BridgeIGBT, N-Channel MOSFET200mA 350mA-0.8V 2.7V-600V----Non-RoHS Compliant----------
-
--Surface Mount14-SOIC (0.154, 3.90mm Width)--40°C~150°C TJTube2000--Obsolete1 (Unlimited)----10V~20V------IR21074S-------Inverting----150ns 50nsIndependent2-Half-BridgeIGBT, N-Channel MOSFET200mA 350mA-0.8V 2.7V-600V----Non-RoHS Compliant-14-SOIC--------
-
--Surface Mount8-SOIC (0.154, 3.90mm Width)--40°C~150°C TJTube1996--Obsolete1 (Unlimited)8--CMOS10V~20VDUALGULL WINGNOT SPECIFIED115VNOT SPECIFIEDIR2104S-------Non-Inverting----100ns 50nsSynchronous20.36AHalf-BridgeIGBT, N-Channel MOSFET210mA 360mAYES0.8V 3V-600V-4.9mm3.9mm-Non-RoHS Compliant--YESEAR99R-PDSO-G8Not QualifiedTOTEM-POLETRUESCHMITT TRIGGER1.75mm
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
15 September 2023
ATMEGA2560-16AU Footprint, Parameters and Application
Ⅰ. What is ATMEGA2560-16AU?ATMEGA2560-16AU is a powerful MCU microcontroller produced by Microchip Corporation of the United States. It uses the AVR CPU core, combined with a rich instruction... -
15 September 2023
Comparing LM741CN and UA741CN Operational Amplifiers
The two op amps, LM741CN and UA741CN, have similar functional and performance characteristics. They both feature single op amps and similar supply voltages and pinouts. However, they have... -
18 September 2023
TL074CN Symbol, Features and Package
Ⅰ. Overview of TL074CNⅡ. 3D Model and symbol of TL074CNⅢ. Footprint of TL074CNⅣ. Technical parametersⅤ. Features of TL074CNⅥ. Application of TL074CNⅦ. Package of TL074CNⅧ. How to optimize the... -
18 September 2023
STM32F103C6T6 Microcontroller：Features, Package and Application
Ⅰ. What is STM32F103C6T6?Ⅱ. 3D Model and pins of STM32F103C6T6Ⅲ. Technical parametersⅣ. Features of STM32F103C6T6Ⅴ. Package of STM32F103C6T6Ⅵ. Application of STM32F103C6T6Ⅶ. Components of the STM32F103C6T6 minimum system boardⅧ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.