Analog Devices Inc. AD584JH
- Part Number:
- AD584JH
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 5038099-AD584JH
- Description:
- IC VREF SERIES PROG TO99-8
- Datasheet:
- AD584JH
Analog Devices Inc. AD584JH technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD584JH.
- Factory Lead Time8 Weeks
- Lifecycle StatusPRODUCTION (Last Updated: 2 weeks ago)
- Mounting TypeThrough Hole
- Package / CaseTO-99-8 Metal Can
- Surface MountNO
- Number of Pins8
- Operating Temperature0°C~70°C TA
- PackagingBulk
- Tolerance±0.3%
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- Temperature Coefficient30ppm/°C
- Terminal FinishTin/Lead (Sn63Pb37)
- SubcategoryVoltage References
- TechnologyBIPOLAR
- Terminal PositionBOTTOM
- Terminal FormWIRE
- Peak Reflow Temperature (Cel)NOT APPLICABLE
- Number of Functions1
- Supply Voltage15V
- Reach Compliance Codenot_compliant
- Current Rating1mA
- Reflow Temperature-Max (s)NOT APPLICABLE
- Base Part NumberAD584
- Pin Count8
- Number of Outputs3
- Qualification StatusNot Qualified
- Output Voltage10V
- Output TypeProgrammable
- Supply Voltage-Max (Vsup)30V
- Supply Voltage-Min (Vsup)4.5V
- Number of Channels1
- Trim/Adjustable OutputYES
- Analog IC - Other TypeTHREE TERMINAL VOLTAGE REFERENCE
- Voltage - Input4.5V~30V
- Current - Output10mA
- Quiescent Current1mA
- Voltage - Output (Min/Fixed)2.5V 5V 7.5V 10V
- Reference TypeSeries
- Temp Coef of Voltage-Max30 ppm/°C
- Noise - 0.1Hz to 10Hz50μVp-p
- RoHS StatusNon-RoHS Compliant
AD584JH Overview
Analog Devices Inc. is the brand of this part, which belongs to the PMIC - Voltage Reference category. It is a PMIC - Voltage Reference chip with a TO-99-8 Metal Can package/case. The operating temperature is 0°C~70°C TA and it has 8 terminations. The technology used is BIPOLAR and the terminal form is WIRE. The current rating is 1mA and it is currently not qualified. The voltage input range is 4.5V~30V and the current output is 10mA. This part is also non-RoHS compliant.
AD584JH Features
±0.3% Tolerance
THREE TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: NOT APPLICABLE
Channel Number: 1
AD584JH Applications
There are a lot of Analog Devices Inc.
AD584JH Voltage Reference applications.
3 V/5 V, 8-bit to 12-bit data converters
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
and Digital-to-Analog Converters
Analog Devices Inc. is the brand of this part, which belongs to the PMIC - Voltage Reference category. It is a PMIC - Voltage Reference chip with a TO-99-8 Metal Can package/case. The operating temperature is 0°C~70°C TA and it has 8 terminations. The technology used is BIPOLAR and the terminal form is WIRE. The current rating is 1mA and it is currently not qualified. The voltage input range is 4.5V~30V and the current output is 10mA. This part is also non-RoHS compliant.
AD584JH Features
±0.3% Tolerance
THREE TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: NOT APPLICABLE
Channel Number: 1
AD584JH Applications
There are a lot of Analog Devices Inc.
AD584JH Voltage Reference applications.
3 V/5 V, 8-bit to 12-bit data converters
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
and Digital-to-Analog Converters
AD584JH More Descriptions
Voltage Reference, 1 Output, 2.5V, Trim/Adjustable, BIPolar, MBCY8, METAL CAN, TO-99, 8 PIN
Voltage Reference; Package/Case:8-TO-99; No. of Pins:8; Leaded Process Compatible:No; Operating Temp. Max:70°C; Operating Temp. Min:0°C; Peak Reflow Compatible (260 C):No; Current Rating:1mA; Features:1mA ;RoHS Compliant: No
The AD584 is an 8-terminal precision voltage reference offering pin programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below, or between the four standard outputs, are available by the addition of external resistors. The input voltage can vary between 4.5 V and 30 V. Laser wafer trimming (LWT) is used to adjust the pin programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form. In addition to the programmable output voltages, the AD584 offers a unique strobe terminal that permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low power signal. In the off state, the current drained by the AD584 is reduced to approximately 100 µA. In the on state, the total supply current is typically 750 µA, including the output buffer amplifier. The AD584 is recommended for use as a reference for 8-, 10-, or 12-bit digital-to-analog converters (DACs) that require an external precision reference. In addition, the device is ideal for analog-to-digital converters (ADCs) of up to 14-bit accuracy, either successive approximation or integrating designs, and in general, it can offer better performance than that provided by standard self-contained references. The AD584J and AD584K are specified for operation from 0°C to 70°C, and the AD584S and AD584T are specified for the -55°C to 125°C range. All grades are packaged in a hermetically sealed, eight-terminal TO-99 metal can, and the AD584J and AD584K are also available in an 8-lead PDIP.
Voltage Reference; Package/Case:8-TO-99; No. of Pins:8; Leaded Process Compatible:No; Operating Temp. Max:70°C; Operating Temp. Min:0°C; Peak Reflow Compatible (260 C):No; Current Rating:1mA; Features:1mA ;RoHS Compliant: No
The AD584 is an 8-terminal precision voltage reference offering pin programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below, or between the four standard outputs, are available by the addition of external resistors. The input voltage can vary between 4.5 V and 30 V. Laser wafer trimming (LWT) is used to adjust the pin programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form. In addition to the programmable output voltages, the AD584 offers a unique strobe terminal that permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low power signal. In the off state, the current drained by the AD584 is reduced to approximately 100 µA. In the on state, the total supply current is typically 750 µA, including the output buffer amplifier. The AD584 is recommended for use as a reference for 8-, 10-, or 12-bit digital-to-analog converters (DACs) that require an external precision reference. In addition, the device is ideal for analog-to-digital converters (ADCs) of up to 14-bit accuracy, either successive approximation or integrating designs, and in general, it can offer better performance than that provided by standard self-contained references. The AD584J and AD584K are specified for operation from 0°C to 70°C, and the AD584S and AD584T are specified for the -55°C to 125°C range. All grades are packaged in a hermetically sealed, eight-terminal TO-99 metal can, and the AD584J and AD584K are also available in an 8-lead PDIP.
The three parts on the right have similar specifications to AD584JH.
-
ImagePart NumberManufacturerFactory Lead TimeLifecycle StatusMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingToleranceJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeTemperature CoefficientTerminal FinishSubcategoryTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageReach Compliance CodeCurrent RatingReflow Temperature-Max (s)Base Part NumberPin CountNumber of OutputsQualification StatusOutput VoltageOutput TypeSupply Voltage-Max (Vsup)Supply Voltage-Min (Vsup)Number of ChannelsTrim/Adjustable OutputAnalog IC - Other TypeVoltage - InputCurrent - OutputQuiescent CurrentVoltage - Output (Min/Fixed)Reference TypeTemp Coef of Voltage-MaxNoise - 0.1Hz to 10HzRoHS StatusTerminal PitchMax Output CurrentOperating Supply CurrentNominal Supply CurrentMax Supply CurrentMin Input VoltageMax Input VoltageReference VoltageHeightLengthWidthRadiation HardeningREACH SVHCLead FreeMax Output VoltageMin Output VoltagePower DissipationView Compare
-
AD584JH8 WeeksPRODUCTION (Last Updated: 2 weeks ago)Through HoleTO-99-8 Metal CanNO80°C~70°C TABulk±0.3%e0noActive1 (Unlimited)8EAR9930ppm/°CTin/Lead (Sn63Pb37)Voltage ReferencesBIPOLARBOTTOMWIRENOT APPLICABLE115Vnot_compliant1mANOT APPLICABLEAD58483Not Qualified10VProgrammable30V4.5V1YESTHREE TERMINAL VOLTAGE REFERENCE4.5V~30V10mA1mA2.5V 5V 7.5V 10VSeries30 ppm/°C50μVp-pNon-RoHS Compliant------------------
-
8 WeeksPRODUCTION (Last Updated: 2 weeks ago)Through Hole8-DIP (0.300, 7.62mm)NO80°C~70°C TATube±0.1%e3noActive1 (Unlimited)8EAR9915ppm/°CMatte Tin (Sn)Voltage ReferencesBIPOLARDUAL--115V---AD58483-10VProgrammable30V-1YESTHREE TERMINAL VOLTAGE REFERENCE4.5V~30V-1mA2.5V 5V 7.5V 10VSeries-50μVp-pROHS3 Compliant2.54mm10mA1mA750μA1mA4.5V40V10V3.3mm9.91mm6.35mmNoNo SVHCContains Lead---
-
8 WeeksPRODUCTION (Last Updated: 4 months ago)Through HoleTO-206AC, TO-52-3 Metal CanNO3-55°C~125°C TABulk±0.4%e4noActive1 (Unlimited)3EAR9925ppm/°CGold (Au)Voltage ReferencesBIPOLARBOTTOMWIRE-115V---AD58031-2.5VFixed--1NOTHREE TERMINAL VOLTAGE REFERENCE4.5V~30V10mA1.5mA-Series25 ppm/°C8μVp-pROHS3 Compliant--1.5mA1.5mA-4.5V40V2.5V3.81mm5.84mm5.84mmNoNo SVHCContains Lead2.5V2.5V-
-
8 WeeksPRODUCTION (Last Updated: 4 weeks ago)Through HoleTO-206AC, TO-52-3 Metal CanNO30°C~70°C TABulk±1%e4noActive1 (Unlimited)3EAR9940ppm/°CGold (Au)Voltage ReferencesBIPOLARBOTTOMWIRE-115V---AD58031-2.5VFixed--1NOTHREE TERMINAL VOLTAGE REFERENCE4.5V~30V10mA1.5mA-Series40 ppm/°C8μVp-pROHS3 Compliant--1.5mA1.5mA-4.5V40V2.5V3.81mm5.84mm5.84mmNoNo SVHCContains Lead2.5V2.5V350mW
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
23 November 2023
AT89C52 Microcontroller Equivalents, Functions, Structure and Applications
Ⅰ. What is AT89C52 microcontroller?Ⅱ. What are the features of AT89C52 microcontroller?Ⅲ. AT89C52 symbol, footprint and pin configurationⅣ. Functions of AT89C52 microcontrollerⅤ. Structure of AT89C52 microcontrollerⅥ. What are... -
24 November 2023
6N136 High Speed Optocoupler Pin Configuration, Features and Working principle
Ⅰ. Overview of 6N136 optocouplerⅡ. Symbol, footprint and pin configuration of 6N136 optocouplerⅢ. Features of 6N136 optocouplerⅣ. Technical parameters of 6N136 optocouplerⅤ. Applications of 6N136 optocouplerⅥ. Working principle... -
24 November 2023
An Introduction to the PCA9685 16-Channel Servo Controller Module
Ⅰ. Overview of PCA9685Ⅱ. Manufacturer of PCA9685Ⅲ. Pin configuration of PCA9685Ⅳ. What are the features of PCA9685?Ⅴ. How does the PCA9685 work?Ⅵ. What are the applications of PCA9685?Ⅶ.... -
27 November 2023
TL082 Operational Amplifier Equivalents, Features, TL072 vs TL082 and Applications
Ⅰ. Overview of TL082 operational amplifierⅡ. Features of TL082 operational amplifierⅢ. Pin configuration of TL082 operational amplifierⅣ. How does the output short-circuit protection function of TL082 work?Ⅴ. Functional...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.