Texas Instruments TPS25842QWRHBTQ1
- Part Number:
- TPS25842QWRHBTQ1
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6395874-TPS25842QWRHBTQ1
- Description:
- USB Type-A SDP/CDP automotive charge port converter cable compensation
- Datasheet:
- tps25842-q1
- Vin (min) (V)4.5
- Vin (max) (V)36
- Continuous current (max) (A)3.5
- Current limit (A)User-selectable current limit
- Operating temperature range (°C)-40 to 125
- EnableActive High
- Number of switches1
- TI functional safety categoryFunctional Safety-Capable
- RatingAutomotive
The TPS2584x-Q1 is a USB Type-A BC1.2 charging solution that includes a synchronous DC/DC converter. With cable droop compensation, the Vbus voltage remains constant regardless of load current, ensuring connected portable devices charge at optimal current and voltage even under heavy loads.
The TPS2584x-Q1 includes high bandwidth analog switches for DP and DM pass-through.
The TPS25840-Q1 also integrates short-to-battery protection on VBUS, DM_IN and DP_IN pins. These pins can withstand voltage up to 18 V. TPS25842-Q1 does not support data line (Dx) short-to-VBAT protection.
The synchronous buck regulator operates with current mode control and is internally compensated to simplify design. A resistor on the RT pin sets the switching frequency between 300 kHz and 2.2 MHz. Operating below 400 kHz results in better system efficiency. Operation above 2.1 MHz avoids the AM radio bands and allows for use of a smaller inductor.
The TPS2584x-Q1 integrates electrical signatures necessary for legacy devices which use USB data lines to determine charging configuration.
A precision current sense amplifier is included for user programmable cable droop compensation and current limit tuning. Cable compensation aids portable devices in charging at optimum current and voltage under heavy loads by changing the buck regulator output voltage linearly with load current to counteract the voltage drop due to wire resistance in automotive cabling. The VBUS voltage measured at a connected portable device remains approximately constant, regardless of load current, allowing the portable devices battery charger to work optimally.
The USB specifications require current limiting of USB charging ports, but give system designers reasonable flexibility to choose overcurrent protection levels based on system requirements. The TPS2584x-Q1 uses a novel two-threshold current limit circuit allowing system designers to either program average current limit protection of the buck regulator, or optionally, current limit using an external NMOS between the CSN/OUT and BUS pins. The NFET implementation enables the TPS2584x-Q1 buck regulator to supply a 5-V output for other loads during an overcurrent condition on the USB port.
Protection features include cycle-by-cycle current limit, hiccup short-circuit protection, undervoltage lockout, VBUS overvoltage and overcurrent, data line (Dx) short to VBUS, and die overtemperature protection.
The TPS25840-Q1 includes high bandwidth analog switches for DP and DM pass-through, and support data line (Dx) short to VBAT protection. TPS25842-Q1 dont support data line (Dx) short to VBAT protection.
Inductor RF Chip Wirewound 5.6nH 0.5nH 100MHz 35Q-Factor 1.5A 20mOhm DCR 0805 Embossed T/R
USB Power Switch Single 36V 5.4A Automotive 32-Pin VQFN EP T/R
USB Type-A Controller 5V 3.5A 32-Pin VQFN T/R
ROHS3Compliant PULSE WIDTH MODULATION S-PQCC-N32 NO LEAD Automotive, USB Protection 700muA -40C~125C TJ 2300kHz 36V
Latest News
-
06 September 2023
NE5532P Functions, Parameters, Advantages and Disadvantages
Ⅰ. NE5532P descriptionNE5532P is a high-performance operational amplifier with excellent DC and AC characteristics. It features extremely low noise, high output drive capability, high unity gain and maximum... -
06 September 2023
TDA8356 Specifications, Characteristics and Application Circuits
Ⅰ. Overview of TDA8356TDA8356 is a new field scanning output integrated circuit produced by Philips of the Netherlands. It is widely used in various domestic and imported large-screen... -
06 September 2023
All You Need to Know About MPS2222A
Ⅰ. Overview of MPS2222AMPS2222A is an NPN transistor produced by Fairchild Semiconductor. Its main features include power dissipation of 0.625W; collector current of 0.6A; maximum withstand voltage of... -
06 September 2023
A4988 Characteristics, Application and Basic Principle
A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.