Texas Instruments SNJ54ABT18502HV
- Part Number:
- SNJ54ABT18502HV
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6405643-SNJ54ABT18502HV
- Description:
- Scan Test Device With 18-Bit Registered Bus Transceiver
- Datasheet:
- sn54abt18502
- Supply voltage (min) (V)4.5
- Supply voltage (max) (V)5.5
- Number of channels18
- IOL (max) (mA)64
- IOH (max) (mA)-24
- Input typeTTL-Compatible CMOS
- Output type3-State
- FeaturesPartial power down (Ioff)
- Technology familyABT
- RatingMilitary
- Operating temperature range (°C)-55 to 125
The SN54ABT18502 scan test device with 18-bit universal bus transceiver is a member of the Texas Instruments SCOPETM testability integrated circuit family. This family of devices supports IEEE Standard 1149.1-1990 boundary scan to facilitate testing of complex circuit-board assemblies. Scan access to the test circuitry is accomplished via the 4-wire test access port (TAP) interface.
In the normal mode, this device is an 18-bit universal bus transceiver that combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, or clocked modes. It can be used either as two 9-bit transceivers or one 18-bit transceiver. The test circuitry can be activated by the TAP to take snapshot samples of the data appearing at the device pins or to perform a self test on the boundary-test cells. Activating the TAP in the normal mode does not affect the functional operation of the SCOPETM universal bus transceiver.
Data flow in each direction is controlled by output-enable ( and ), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A-bus data is latched while CLKAB is held at a static low or high logic level. Otherwise, if LEAB is low, A-bus data is stored on a low-to-high transition of CLKAB. When is low, the B outputs are active. When is high, the B outputs are in the high-impedance state. B-to-A data flow is similar to A-to-B data flow but uses the , LEBA, and CLKBA inputs.
In the test mode, the normal operation of the SCOPETM universal bus transceivers is inhibited and the test circuitry is enabled to observe and control the I/O boundary of the device. When enabled, the test circuitry performs boundary-scan test operations according to the protocol described in IEEE Standard 1149.1-1990.
Four dedicated test pins observe and control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and pseudo-random pattern generation (PRPG) from data outputs. All testing and scan operations are synchronized to the TAP interface.
Additional flexibility is provided in the test mode through the use of two boundary-scan cells (BSCs) for each I/O pin. This allows independent test data to be captured and forced at either bus (A or B). A PSA/COUNT instruction also is included to ease the testing of memories and other circuits where a binary count addressing scheme is useful.
The SN54ABT18502 is characterized for operation over the full military temperature range of -55°C to 125°C.
Latest News
-
11 December 2023
STM32F030F4P6 32-bit Microcontroller Features, Advantages and disadvantages, Dimension and Applications
Ⅰ. What is STM32F030F4P6?Ⅱ. Symbol, footprint and pin configuration of STM32F030F4P6 microcontrollerⅢ. What are the features of STM32F030F4P6 microcontroller?Ⅳ. Advantages and disadvantages of STM32F030F4P6 microcontrollerⅤ. Technical parameters of... -
11 December 2023
CR2032 vs CR2450: What is the Difference?
Ⅰ. What is a button battery?Ⅱ. CR2032 vs CR2450: OverviewⅢ. CR2032 vs CR2450: Symbol and footprintⅣ. CR2032 vs CR2450: FeaturesⅤ. CR2032 vs CR2450: Technical parametersⅥ. CR2450 vs CR2032:... -
12 December 2023
What is 74LS74 Dual D Flip Flop?
Ⅰ. What is a D flip-flop?Ⅱ. Overview of 74LS74Ⅲ. Pin configuration and functions of 74LS74Ⅳ. What are the features of 74LS74?Ⅴ. Structure and working principle of 74LS74Ⅵ. Technical... -
12 December 2023
TM1650 LED Driver IC Features, Working Principle, Applications, Usage and More
Ⅰ. Overview of TM1650Ⅱ. Symbol, footprint and pin configuration of TM1650Ⅲ. Features of TM1650 LED driverⅣ. Technical parameters of TM1650 LED driverⅤ. How does the TM1650 LED driver...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.