Texas Instruments SN74LVC1G80DBVT

SN74LVC1G80DBVT Overview
As a result, it is packaged as SC-74A, SOT-753. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Inverted. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. Currently, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74LVCseries of FPGAs. A frequency of 160MHzshould be the maximum output frequency. There is 10μA quiescent consumption. A total of 5 terminations have been made. The object belongs to the 74LVC1G80 family. It is powered from a supply voltage of 1.8V. The input capacitance of this JK flip flopis 3.5pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. There are 5pins on it. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. There are 1bits in its design. Despite its superior flexibility, it relies on 1 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for TR. The D latch operates on 3.3V volts. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA.

SN74LVC1G80DBVT Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G80DBVT Applications
There are a lot of Texas Instruments SN74LVC1G80DBVT Flip Flops applications.

Load Control
EMI reduction circuitry
Shift Registers
Divide a clock signal by 2 or 4
Asynchronous counter
Patented noise
Guaranteed simultaneous switching noise level
QML qualified product
Frequency division
Bounce elimination switch