Texas Instruments M38510/32503BSA
- Part Number:
- M38510/32503BSA
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6406123-M38510/32503BSA
- Description:
- Octal D-Type Edge Triggered Flip-Flops with 3-State Outputs
- Datasheet:
- sn54ls374
- Number of channels8
- Technology familyLS
- Supply voltage (min) (V)4.5
- Supply voltage (max) (V)5.5
- Input typeBipolar
- Output type3-State
- Clock frequency (max) (MHz)35
- IOL (max) (mA)24
- IOH (max) (mA)-2.6
- Supply current (max) (μA)40000
- FeaturesHigh speed (tpd 10-50ns)
- Operating temperature range (°C)-55 to 125
- RatingMilitary
These 8-bit registers feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pullup components. These devices are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight latches of the LS373 and S373 are transparent D-type latches, meaning that while the enable (C or CLK) input is high, the Q outputs follow the data (D) inputs. When C or CLK is taken low, the output is latched at the level of the data that was set up.
The eight flip-flops of the LS374 and S374 are edge-triggered D-type flip-flops. On the positive transition of the clock, the Q outputs are set to the logic states that were set up at the D inputs.
Schmitt-trigger buffered inputs at the enable/clock lines of the S373 and S374 devices simplify system design as ac and dc noise rejection is improved by typically 400 mV due to the input hysteresis. A buffered output-control (OC) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly.
OC\ does not affect the internal operation of the latches or flip-flops. That is, the old data can be retained or new data can be entered, even while the outputs are off.
Latest News
-
30 October 2023
TDA2822 Dual Power Amplifier: Pin Configuration, Applications and Additional Information
Ⅰ. Overview of TDA2822 amplifierⅡ. TDA2822 symbol, footprint and pin configurationⅢ. Technical parameters of TDA2822 amplifierⅣ. Features of TDA2822 amplifierⅤ. How does the TDA2822 amplifier work?Ⅵ. What are... -
31 October 2023
ESP32 vs RP2040 vs STM32: Which is Best for Your Project?
Ⅰ. What is a microcontroller?Ⅱ. ESP32 vs RP2040 vs STM32: OverviewⅢ. ESP32 vs RP2040 vs STM32: ManufacturersⅣ. ESP32 vs RP2040 vs STM32: Pin configurationⅤ. ESP32 vs RP2040 vs... -
31 October 2023
STM32F407VET6 Microcontroller: Symbol, Features, Working Principle
Ⅰ. What is STM32F407VET6 microcontroller?Ⅱ. Symbol, footprint and pin configuration of STM32F407VET6 microcontrollerⅢ. Technical parameters of STM32F407VET6 microcontrollerⅣ. Features of STM32F407VET6 microcontrollerⅤ. Dimension and package of STM32F407VET6 microcontrollerⅥ.... -
01 November 2023
Power MOSFET IRFP460: Manufacturer, Technical Parameters and Applications
Ⅰ. Overview of IRFP460Ⅱ. Manufacturer of IRFP460Ⅲ. Symbol, footprint and pin configuration of IRFP460Ⅳ. What are the features of IRFP460?Ⅴ. Technical parameters of IRFP460Ⅵ. What are the parallel...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.