SN74LVC1G66DCKR

Texas Instruments SN74LVC1G66DCKR

Part Number:
SN74LVC1G66DCKR
Manufacturer:
Texas Instruments
Ventron No:
3670070-SN74LVC1G66DCKR
Description:
5-V, 1:1 (SPST), 1-channel analog switch
ECAD Model:
Datasheet:
sn74lvc1g66

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Part Pictures
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
  • SN74LVC1G66DCKR Detail Images
Specifications
Texas Instruments SN74LVC1G66DCKR technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments SN74LVC1G66DCKR.
  • Factory Lead Time
    6 Weeks
  • Lifecycle Status
    ACTIVE (Last Updated: 1 day ago)
  • Contact Plating
    Gold
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    5-TSSOP, SC-70-5, SOT-353
  • Number of Pins
    5
  • Weight
    2.494758mg
  • Operating Temperature
    -40°C~85°C TA
  • Packaging
    Cut Tape (CT)
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    5
  • Termination
    SMD/SMT
  • ECCN Code
    EAR99
  • Resistance
    10Ohm
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    1.8V
  • Base Part Number
    74LVC1G66
  • Pin Count
    5
  • Polarity
    Non-Inverting
  • Number of Channels
    1
  • Max Supply Voltage
    5.5V
  • Min Supply Voltage
    1.65V
  • Analog IC - Other Type
    SPDT
  • Operating Supply Current
    10μA
  • Nominal Supply Current
    1μA
  • Output Current
    50mA
  • Max Supply Current
    10μA
  • Throw Configuration
    SPST
  • Propagation Delay
    600 ps
  • Turn On Delay Time
    4.2 ns
  • Supply Type
    Single
  • Bandwidth
    300MHz
  • Turn-Off Delay Time
    5 ns
  • 3db Bandwidth
    300MHz
  • On-State Resistance (Max)
    10Ohm
  • High Level Output Current
    50mA
  • Low Level Output Current
    50mA
  • Multiplexer/Demultiplexer Circuit
    1:1
  • Off-state Isolation-Nom
    58 dB
  • Current - Leakage (IS(off)) (Max)
    100nA
  • Channel Capacitance (CS(off), CD(off))
    6pF
  • On-state Resistance Match-Nom
    12Ohm
  • Switch Circuit
    SPST - NO
  • Switch Time (Ton, Toff) (Max)
    4.2ns, 5ns
  • Switching
    BREAK-BEFORE-MAKE
  • Voltage - Supply, Single (V )
    1.65V~5.5V
  • Max Junction Temperature (Tj)
    150°C
  • Drain to Source Resistance
    12Ohm
  • Normal Position
    NC
  • Ambient Temperature Range High
    85°C
  • On-State Resistance
    5.5Ohm
  • Height
    1.1mm
  • Length
    2mm
  • Width
    1.25mm
  • Thickness
    900μm
  • Radiation Hardening
    No
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
SN74LVC1G66DCKR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. High reliability is provided by advanced packaging method Cut Tape (CT). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. A total of 5 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 5 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. Search with 74LVC1G66 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 10Ohm. You can find the functions of the 5 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage fed to the electronic component should be 1.65V. It would be sufficient to run this analogue multiplexer with 10μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 10μA. This product is integrated with an analog integrated circuit (IC) of type SPDT. This switch operates within the bandwidth of 300MHz. There is 12Ohm Drain to Source resistance on this electronic part.

SN74LVC1G66DCKR Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
Drain-to-Source resistance: 12Ohm

SN74LVC1G66DCKR Applications
There are a lot of Texas Instruments SN74LVC1G66DCKR Analog Switches & Multiplexers ICs applications.

High reliability control systems
Video signal routing
Fiber In The Loop (FITL)
T1/E1 Terminals
RGB switches
USB 1.1 signal switching circuits
Mechanical reed relay replacement
SDH/SONET multiplexers
PCMCIA cards
DVD-R
SN74LVC1G66DCKR More Descriptions
5-V, 1:1 (SPST), 1-channel analog switch 5-SC70 -40 to 85
Analog Switch Single SPST 5-Pin SC-70 T/R
French Electronic Distributor since 1988
Logic - Signal Switches Single Bilateral
SPST, 1 Func, 1 Channel, CMOS, PDSO5
IC,SN74LVC1G66DCKR,SINGLE ANAL OG SWITCH
IC, ANA SWITCH, SINGLE, SMD, FULL REEL
SN74LVC1G66 SINGLE ANALOG SWITCH
IC SWITCH SPST-NOX1 10OHM SC70-5
IC, ANA SWITCH, SINGLE, SMD; Nombre de voies: 1Canal(aux); Type de commutation analogique: SPST; Résistance, Ron, max..: 10ohm; Gamme de tension d'alimentation: 1.65V à 5.5V; Boîtier commutateur analogique: SC-70; Nombre de b
SN74LVC1G66DCKR Detail Images
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • 25 March 2024

    IR2110 MOSFET Driver Functions, Features, Working Principle and IR2110 vs IR2113

    Ⅰ. IR2110 descriptionⅡ. Main functions of IR2110Ⅲ. Functional block diagram of IR2110Ⅳ. Summary of featuresⅤ. Working principle of IR2110Ⅵ. Application of IR2110Ⅶ. What is the difference between IR2110...
  • 25 March 2024

    USB3300-EZK Manufacturer, Pinout, Features and Application

    Ⅰ. USB3300-EZK descriptionⅡ. Manufacturer of USB3300-EZKⅢ. Pin diagram of USB3300-EZKⅣ. Technical parameters of USB3300-EZKⅤ. Application of USB3300-EZKⅥ. Functional features of USB3300-EZKⅦ. How does USB3300-EZK support OTG protocol?Ⅰ. USB3300-EZK...
  • 26 March 2024

    Everything You Need to Know About the TL431 Voltage Regulator

    Ⅰ. What is TL431 regulator?Ⅱ. Main features of TL431Ⅲ. TL431 ratingsⅣ. How to measure the quality of TL431?Ⅴ. What can it be used for?Ⅵ. How to distinguish the...
  • 26 March 2024

    A Complete Guide to the TB6600HG

    Ⅰ. TB6600HG descriptionⅡ. Specifications of TB6600HGⅢ. Operating conditions of TB6600HGⅣ. How to connect TB6600HG to the control system?Ⅴ. TB6600HG product featuresⅥ. Pin configuration of TB6600HGⅦ. Function description of...
  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.