Texas Instruments TUSB2E111YCGR

Name: TUSB2E111YCGR
Brand: Texas Instruments
SKU: 6410413-TUSB2E111YCGR
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: TUSB2E111YCGR

Manufacturer:: Texas Instruments

Ventron No:: 6410413-TUSB2E111YCGR

Description:: USB 2.0-eUSB2 one-port repeater

ECAD Model:

Datasheet:: tusb2e11

Specifications

Texas Instruments TUSB2E111YCGR technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TUSB2E111YCGR.

Type
Redriver
Function
USB 2.0
USB speed (MBps)
480
Number of channels
1
Supply voltage (max) (V)
4.32
Supply voltage (min) (V)
-0.3
Configuration
Single channel
Features
Full-speed (FS)
Rating
Catalog
Operating temperature range (°C)
-20 to 85
ESD HBM (typ) (kV)
1.5
Bandwidth (MHz)
240

Description

TUSB2E11 is a USB compliant eUSB2 to USB 2.0 repeater supporting both device and host modes.

The device supports USB low-speed (LS), full-speed (FS) signals, and high-speed (HS) signals.

The device has multiple patented designs to provide robust interoperability, optimum performance, and power.

For systems without an I²C interface, the device offers eight individual settings with three strap-pins for USB 2.0 channel Equivalent Series Resistance (ESR) up to 20 Ω. Device variants are available for different levels of eUSB2 trace length compensation up to 10 inches.

The I²C interface permits additional flexibility for fine tuning of device RX equalization and TX amplitude, slew rate and pre-emphasis to pass electrical compliance tests and compensate for channel loss.

Various debug options are available through the 3 GPIO pins that can be configured to monitor various USB bus states or interrupt as well as CTA-936 UART mode that can provide SoC debug capabilities. GPIO0 and GPIO1 can be used as general purpose I²C to GPIOs bridge.

Certification