Texas Instruments SN74HC4040N

SN74HC4040N Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. It is configured with 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. An interconnection of 1elements is provided by wires. 16is the number of pins on all components. It is packaged in the way of Tube. In the circuit, 16pins are used to connect other components. The Through Holeway is used to mount it. It emerges as a member of HC/UH family. With its 74HCseries designation, it can be used for a range of applications. It is decided to use the logic type [0]. The operating temperature should be set at -40°C~85°C. Mounting type Through Holeis used. Providing a voltage of 2V~6Vensures higher reliability of operation. An array consists of 12bits for each element. Among its base part number [0], you will find additional parts that are related. In this case, 2/6Vvoltage is generated by the voltage source. In order for it to operate, it requires a supply voltage of 5V . In the case of the supply voltage (Vsup), it can be as low as 2V. In this case, the frequency is 53MHz Hz. Up to a maximum voltage of 6Vcan be supplied (Vsup).

SN74HC4040N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
12 bits per element
Operating supply voltage of 5V
Frequency of 53MHz

SN74HC4040N Applications
There are a lot of Texas Instruments SN74HC4040N Counters & Dividers applications.

Signal gating
POWER COMPUTATION
Dual Up Counters
MULTIPLICATION
VHF, UHF, FM, AM, etc.
Communications Digital Frequency Synthesizers;
Programmable decade counters
Timing applications
Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
SQUARING