Texas Instruments M38510/31509BFA
- Part Number:
- M38510/31509BFA
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6406064-M38510/31509BFA
- Description:
- Synchronous Up/Down Counters With Down/Up Mode Control
- Datasheet:
- sn54ls191
- FunctionCounter
- Bits (#)4
- Technology familyLS
- Supply voltage (min) (V)4.75
- Supply voltage (max) (V)5.25
- Input typeBipolar
- Output typePush-Pull
- FeaturesHigh speed (tpd 10-50ns)
- Operating temperature range (°C)-55 to 125
- RatingMilitary
The '190, 'LS190, '191, and 'LS191 are synchronous, reversible up/down counters having a complexity of 58 equivalent gates. The '191 and 'LS191 are 4-bit binary counters and the '190 and 'LS190 are BCD counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters.
The outputs of the four master-slave flip-flops are triggered on a low-to-high transition of the clock input if the enable input is low. A high at the enable input inhibits counting. Level changes at the enable input should be made only when the clock input is high. The direction of the count is determined by the level of the down/up input. When low, the counter count up and when high, it counts down. A false clock may occur if the down/up input changes while the clock is low. A false ripple carry may occur if both the clock and enable are low and the down/up input is high during a load pulse.
These counters are fully programmable; that is, the outputs may be preset to either level by placing a low on the load input and entering the desired data at the data inputs. The output will change to agree with the data inputs independently of the level of the clock input. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.
The clock, down/up, and load inputs are buffered to lower the drive requirement which significantly reduces the number of clock drivers, etc., required for long parallel words.
Two outputs have been made available to perform the cascading function: ripple clock and maximum/minimum count. The latter output produces a high-level output pulse with a duration approximately equal to one complete cycle of the clock when the counter overflows or underflows. The ripple clock output produces a low-level output pulse equal in width to the low-level portion of the clock input when an overflow or underflow condition exists. The counters can be easily cascaded by feeding the ripple clock output to the enable input of the succeeding counter if parallel clocking is used, or to the clock input if parallel enabling is used. The maximum/minimum count output can be used to accomplish look-ahead for high-speed operation.
Series 54' and 54LS' are characterized for operation over the full military temperature range of -55°C to 125°C; Series 74' and 74LS' are characterized for operation from 0°C to 70°C.
Latest News
-
17 November 2023
IRF3710 Transistor Equivalents, Working Principle, Applications and Other Details
Ⅰ. Overview of IRF3710 transistorⅡ. Symbol, footprint and pin configuration of IRF3710 transistorⅢ. Features of IRF3710 transistorⅣ. Technical parameters of IRF3710 transistorⅤ. How does the IRF3710 transistor work?Ⅵ.... -
17 November 2023
MSP430 Microcontroller Features, Development, MSP430 vs 89C51 and Applications
Ⅰ. What is a microcontroller?Ⅱ. Overview of MSP430 microcontrollerⅢ. Features of MSP430Ⅳ. Development of MSP430 microcontrollerⅤ. Main components of MSP430 microcontrollerⅥ. What are the advantages and disadvantages of... -
20 November 2023
What is W25Q128JVSIQ Serial Flash Memory?
Ⅰ. W25Q128JVSIQ overviewⅡ. Manufacturer of W25Q128JVSIQⅢ. Symbol, footprint and pin configuration of W25Q128JVSIQⅣ. Features of W25Q128JVSIQⅤ. Working principle of W25Q128JVSIQⅥ. Technical parameters of W25Q128JVSIQⅦ. Advantages and disadvantages of... -
20 November 2023
Comparing the DHT11 and DHT22 Temperature and Humidity Sensor
Ⅰ. What is a temperature sensor?Ⅱ. DHT11 vs DHT22: OverviewⅢ. DHT11 vs DHT22: Symbol and footprintⅣ. DHT11 vs DHT22: FeaturesⅤ. DHT11 vs DHT22: Pin configurationⅥ. DHT11 vs DHT22:...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.