Texas Instruments JM38510/31509BEA
- Part Number:
- JM38510/31509BEA
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6406061-JM38510/31509BEA
- Description:
- Synchronous Up/Down Counters With Down/Up Mode Control
- Datasheet:
- sn54ls191
- FunctionCounter
- Bits (#)4
- Technology familyLS
- Supply voltage (min) (V)4.75
- Supply voltage (max) (V)5.25
- Input typeBipolar
- Output typePush-Pull
- FeaturesHigh speed (tpd 10-50ns)
- Operating temperature range (°C)-55 to 125
- RatingMilitary
The '190, 'LS190, '191, and 'LS191 are synchronous, reversible up/down counters having a complexity of 58 equivalent gates. The '191 and 'LS191 are 4-bit binary counters and the '190 and 'LS190 are BCD counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when so instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple clock) counters.
The outputs of the four master-slave flip-flops are triggered on a low-to-high transition of the clock input if the enable input is low. A high at the enable input inhibits counting. Level changes at the enable input should be made only when the clock input is high. The direction of the count is determined by the level of the down/up input. When low, the counter count up and when high, it counts down. A false clock may occur if the down/up input changes while the clock is low. A false ripple carry may occur if both the clock and enable are low and the down/up input is high during a load pulse.
These counters are fully programmable; that is, the outputs may be preset to either level by placing a low on the load input and entering the desired data at the data inputs. The output will change to agree with the data inputs independently of the level of the clock input. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.
The clock, down/up, and load inputs are buffered to lower the drive requirement which significantly reduces the number of clock drivers, etc., required for long parallel words.
Two outputs have been made available to perform the cascading function: ripple clock and maximum/minimum count. The latter output produces a high-level output pulse with a duration approximately equal to one complete cycle of the clock when the counter overflows or underflows. The ripple clock output produces a low-level output pulse equal in width to the low-level portion of the clock input when an overflow or underflow condition exists. The counters can be easily cascaded by feeding the ripple clock output to the enable input of the succeeding counter if parallel clocking is used, or to the clock input if parallel enabling is used. The maximum/minimum count output can be used to accomplish look-ahead for high-speed operation.
Series 54' and 54LS' are characterized for operation over the full military temperature range of -55°C to 125°C; Series 74' and 74LS' are characterized for operation from 0°C to 70°C.
Latest News
-
01 March 2024
BCM89811B1AWMLG Manufacturer, Characteristics, Specifications and Purchase Guide
Ⅰ. Overview of BCM89811B1AWMLGⅡ. Manufacturer of BCM89811B1AWMLGⅢ. What are the characteristics of BCM89811B1AWMLG?Ⅳ. Where is BCM89811B1AWMLG used?Ⅴ. What is the connection method of BCM89811B1AWMLG?Ⅵ. Specifications of BCM89811B1AWMLGⅦ. Competitive... -
04 March 2024
NCP1377BDR2G Symbol, Operating Principle, Technical Parameters and More
Ⅰ. NCP1377BDR2G overviewⅡ. Symbol, footprint and pin configuration of NCP1377BDR2GⅢ. Operating principle of NCP1377BDR2GⅣ. Internal circuit architecture of NCP1377BDR2GⅤ. Precautions for the use of NCP1377BDR2GⅥ. Technical parameters of... -
04 March 2024
ADS1248IPWR Specifications, Characteristics, Applications and Market Trends
Ⅰ. Introduction to ADS1248IPWRⅡ. Specifications of ADS1248IPWRⅢ. Functional block diagram of ADS1248IPWRⅣ. Characteristics of ADS1248IPWRⅤ. Where is ADS1248IPWR used?Ⅵ. Absolute maximum ratings of ADS1248IPWRⅦ. Market trends of ADS1248IPWRⅧ.... -
05 March 2024
KA7500B: Efficient and Stable PWM Switching Regulator Controller
Ⅰ. What is KA7500B?Ⅱ. Characteristics of KA7500BⅢ. KA7500B working parts and principleⅣ. Internal block diagram of KA7500BⅤ. Applications of KA7500BⅥ. Can KA7500B and KA7500BD be replaced?Ⅶ. How to...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.