Texas Instruments SN65LVDS1050PWG4

SN65LVDS1050PWG4 Overview
Packaged in 16-TSSOP (0.173, 4.40mm Width), power buffer can be easily transported.Package number Tube is ready for power buffer.An easy-to-adjust universal mout is included with the Surface Mount.As for types, this is an example of a typical Buffer, ReDriver.2.4V~3.6V voltage is used to power this op amp buffer.As a result, LVDS, LVTTL input is facilitated.For the operational amplifier buffer to function properly, the operating temperature should be set to -40°C~85°C.Using "65LVDS1050" will give you more solutions for your unique needs.16 terminals are located on the op amp buffer.During reflow, it reaches a temperature of 260.2.7V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.There are 16 pins on the Power buffer, which corresponds to the pinout of the Power buffer.In LVDS, LVTTL, it produces output.With 16 pins, it is connected.A Surface Mount hole is available for mounting it on a PCB or another board.A power buffer like the power buffer plays a crucial role in the industry.Voltage 23mA is needed to operate this power buffer.It is necessary to supply voltage 2.7V for normal operation.There is a 2-Bit receiver used in it.Splitters should have a nominal supply current of 20mA for normal operation.An interface repeater signal with 2 elements.

SN65LVDS1050PWG4 Features
A standard Line Driver or Receivers.
2-Bit receiver.

SN65LVDS1050PWG4 Applications
There are a lot of Texas Instruments SN65LVDS1050PWG4 Signal Buffers, Repeaters, Splitters applications.

Storage Area Networks
Digital Crossconnects
Digital Cross-Connects
Portable IPC/HMI
Laptop Computers (for External Video Cards)
Cable Repeaters
Network Switches/Routers
Industrial/Embedded PC
Backplane Interconnect
Test Equipment