SN65LVDS22DR

SN65LVDS22DR Overview
For convenience, power buffer comes packaged in 16-SOIC (0.154, 3.90mm Width).In Tape & Reel (TR) packages, ready for power buffer.A universal mounting system for easy adaptation.Typical Buffer, Multiplexer type.The op amp buffer uses 3V~3.6V voltage to operate.It is important for 1 x 2:2 channels to work together in order to maintain the output quality at all times.It facilitates LVDS input.The operating temperature should be set to -40°C~85°C to avoid mal-function.For more pin-to-pin solutions, try "65LVDS22".There are two 16 terminals on the op amp buffer and you can find them at the end of the op amp buffer.The peak reflow temperature of it is 260.With its 3.3V voltage supply, the splitter can perform many demanding functions that are expected from it.It starts with the 16 pins of the Power buffer in order to determine the pinout of the Power buffer.The op amp buffers have 16 pins.A mounting hole is provided for mounting on PCBs and other boards.The power buffer is powered by 20mA voltage.Operating voltage 3.3V is required for normal operation.For normal use of the splitter, the nominal supply current should be 20mA.The repeater signal implements 2 receivers.

SN65LVDS22DR Features
1 x 2:2 channels.

SN65LVDS22DR Applications
There are a lot of Texas Instruments SN65LVDS22DR Signal Buffers, Repeaters, Splitters applications.

Backplane Interconnect
Loopback
Industrial Server
Cable Repeaters
Data or Clock Signal Amplification
PECL-to-LVDS Translation
Multidrop Buses
Storage Area Networks
Industrial/Embedded PC
Network Switches/Routers