ON Semiconductor MC10EL89DG

Clock Fanout Buffer 2-OUT 1-IN 1:2 8-Pin SOIC N Tube
MC10EL89 Series 5.7 V 1.5 GHz Surface Mount ECL Coaxial Cable Driver - SOIC-8
IC, ECL 100, SMD, 10EL89, SOIC8, 5V; Device Type: Coaxial Cable Driver; IC Interface Type: -; No. of Drivers: 1Drivers; Supply Voltage Min: 4.2V; Supply Voltage Max: 5.7V; Driver Case Style: SOIC; No. of Pins: 8Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; IC Generic Number: MC10EL89; SVHC: No SVHC (27-Jun-2018); Logic Case Style: SOIC; Operating Temperature Range: -40°C to 85°C; Supply Voltage Range: ± 4.2V to ± 5.7V; Termination Type: Surface Mount Device
COAXIAL CABLE DRIVER, 375ps, SOIC-8; IC Type:Coaxial Cable Transmitter; No. of Receivers:1Receivers; No. of Transmitters:1; Communication Mode:-; Data Rate Max:-; Supply Voltage Min:4.2V; Supply Voltage Max:5.7V; No. of Pins:8Pins RoHS Compliant: Yes
The MC10EL/100EL89 is a differential fanout gate specifically designed to drive coaxial cables. The device is especially useful in Digital Video Broadcasting applications; for this application since the system is polarity free each output can be used as an idependent driver. The driver boasts a gain of approximately 40 and produces output swings twice as large as a standard ECL output. When driving a coaxial cable proper termination is required at both ends of the line to minimize signal loss. The 1.6V output swings allow for termination at both ends of the cable while maintaining the required 800mV swing at the receiving end of the cable. Because of the larger output swings the device cannot be terminated into the standard -2.0V. All of the DC parameters are tested with a 50 O to -3.0V load. The driver accepts a standard differential ECL input and can run off of the Digital Video Broadcast standard -5.0V supply.