AD8322ARUZ-REEL

Analog Devices Inc. AD8322ARUZ-REEL

Part Number:
AD8322ARUZ-REEL
Manufacturer:
Analog Devices Inc.
Ventron No:
8539938-AD8322ARUZ-REEL
Description:
5V 28 Pin AD8322 Receivers Min 4.75V V Max 5.25V V
ECAD Model:
Datasheet:
AD8322ARUZ-REEL

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Analog Devices Inc. AD8322ARUZ-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8322ARUZ-REEL.
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    28-TSSOP (0.173, 4.40mm Width)
  • Number of Pins
    28
  • Supplier Device Package
    28-TSSOP
  • Packaging
    Tape & Reel (TR)
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Resistance
    235Ohm
  • Max Operating Temperature
    85°C
  • Min Operating Temperature
    -40°C
  • Base Part Number
    AD8322
  • Operating Supply Voltage
    5V
  • Number of Elements
    1
  • Number of Channels
    1
  • Max Supply Voltage
    5.25V
  • Min Supply Voltage
    4.75V
  • Nominal Supply Current
    113mA
  • Power Dissipation
    900mW
  • Voltage Gain
    43.2dB
  • Radiation Hardening
    No
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Contains Lead
Description
AD8322ARUZ-REEL Overview
LED drivers with the enhanced 28-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tape & Reel (TR) format.Since this part is a Line Driver, Transmitter can transceiver, a number of solutions have been able to utiliLine Driver, Transmittere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.With the part number AD8322 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 28-pin driver IC with enhanced power dissipation controls.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.There is a voltage supply of 5V required in order for this transceiver module to be operated.A transceiver module's temperature less than 85°C must be used for operation.This optical transceiver must not be operated at a temperature below -40°C when it is at its minimum operating temperature.It is specified that the transceiver's maximum supply voltage for this IC shall be 5.25V.This line driver ic requires a minimum voltage supply of 4.75V in order to operate properly.As part of the 28-TSSOP supplier package, this line driver ic is integrated into the system.optical transceivers such as this one have a total of 1 channels embedded into them.1 elements are included in this integrated circuit to facilitate multiple tasks at the same time.

AD8322ARUZ-REEL Features
Tape & Reel (TR) package
28 pins
1 channels
1 elements


AD8322ARUZ-REEL Applications
There are a lot of Analog Devices Inc.
AD8322ARUZ-REEL Drivers/Receivers/Transceivers applications.


Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
AD8322ARUZ-REEL More Descriptions
SP Amp Line Driver Amp Single 5.25V 28-Pin TSSOP T/R
IC VIDEO LINE DRVR/TRANS 28TSSOP
IC LN DVR CATV COARS-STP 28TSSOP
TSSOP COARSE STEP 5V CATV LINE DRIVER
Line Driver, 1 Func, 1 Driver, PDSO28
The AD8322 is a low cost digitally controlled variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard. A 8-bit serial word determines the desired output gain over a 42 dB range resulting in gain changes of 6 dB/LSB. The AD8322 comprises a digitally controlled variable attenuator of 0 dB to -42 dB, which is preceded by a low noise, fixed gain buffer and is followed by a low distortion high power amplifier. When used in a DOCSIS modem application the AD8322 works with the attenuator available on some demodulators to support the 50 dB range required by DOCSIS. The AD8322 accepts a differential or single-ended input signal. The output is specified for driving a 75 Ohm load, such as coaxial cable, although the AD8322 is capable of driving other loads. An evaluation board is available for this product and may be ordered using the following product number AD8322-EVAL.
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.