MAX490EEPA

Maxim Integrated MAX490EEPA

Part Number:
MAX490EEPA
Manufacturer:
Maxim Integrated
Ventron No:
3675336-MAX490EEPA
Description:
IC TXRX RS485/RS422 8-DIP
ECAD Model:
Datasheet:
MAX490EEPA

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Maxim Integrated MAX490EEPA technical specifications, attributes, parameters and parts with similar specifications to Maxim Integrated MAX490EEPA .
  • Factory Lead Time
    6 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    8-DIP (0.300, 7.62mm)
  • Number of Pins
    8
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tube
  • Published
    2012
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Line Driver or Receivers
  • Max Power Dissipation
    727mW
  • Technology
    CMOS
  • Voltage - Supply
    4.75V~5.25V
  • Terminal Position
    DUAL
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch
    2.54mm
  • Base Part Number
    MAX490
  • Pin Count
    8
  • Output Voltage
    12.5V
  • Operating Supply Voltage
    5V
  • Power Supplies
    5V
  • Interface
    RS-422, RS-485
  • Nominal Supply Current
    500μA
  • Logic Function
    Receiver, Transceiver
  • Data Rate
    2.5Mbps
  • Output Characteristics
    TOTEM-POLE
  • Differential Output
    YES
  • Output Polarity
    COMPLEMENTARY
  • Protocol
    RS422, RS485
  • Input Characteristics
    DIFFERENTIAL SCHMITT TRIGGER
  • Number of Drivers/Receivers
    1/1
  • Driver Number of Bits
    1
  • Receiver Number of Bits
    1
  • Duplex
    Full
  • Receiver Hysteresis
    70mV
  • Number of Transceivers
    1
  • Simplex/Duplex
    Full Duplex
  • Transmit Delay-Max
    60 ns
  • Output Low Current-Max
    0.004A
  • High Level Input Current-Max
    0.000002A
  • Height Seated (Max)
    4.572mm
  • Length
    9.375mm
  • Width
    7.62mm
  • Radiation Hardening
    No
  • REACH SVHC
    Unknown
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
MAX490EEPA Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, you can install this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.MAX490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.ICs implement a total of 1 transceivers.There is a capabilWide receivery to deliver voltage at 12.5V wWide receiverh this device.

MAX490EEPA Features
Tube package
8 pin count
8 pins
5V power supply

MAX490EEPA Applications
There are a lot of Maxim Integrated MAX490EEPA Drivers/Receivers/Transceivers applications.

VoIP phones
Wireless transmission
Car radio
Carrier phase observations
Automation systems
Satellite communication
Telecom applications
Long-distance fiber optic network applications
Notebook
SONET/SDH Network
MAX490EEPA More Descriptions
MAX490E Series 2.5 Mbps 12 V Full Duplex Through Hole RS 485 Transceiver - DIP-8
±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers
RS422/RS485 TXRX, 2.5MBPS, 5.25V, DIP-8; IC Type:RS422 / RS485 Transceiver; No. of Receivers:1Receivers; No. of Transmitters:1; Communication Mode:Full Duplex; Data Rate Max:2.5Mbps; Supply Voltage Min:4.75V; Supply Voltage Max:5.25VRoHS Compliant: Yes
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.