Winbond Electronics W25X20AVSNIG

W25X20AVSNIG Overview
Non-Volatile is its memory type. It is available in a case with a Tube shape. As you can see, it is embedded in 8-SOIC (0.154, 3.90mm Width) case. There is an 2Mb 256K x 8 memory capacity on the chip. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.7V~3.6V is possible to be applied to the supply. There is a recommendation that Surface Mount mounting type should be used for this product. As you can see from the diagram, the chip is planted with 8 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 3V power supply. With a clock frequency of 100MHz, the memory rotates on its own. It is encased in an 8-pin package that contains this ic memory chip. It has 8 pins indicating it has 8 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. Among the SpiFlash® series of memory devices, this part is essential for its applications. By integrating with the SPI-type serial bus, this memory transmits data to the processor. This memory ics is capable of operating with an input current of 0.025mA at max. A programming voltage of 2.7V is needed to alter the state of certain nonvolatile memory arrays.

W25X20AVSNIG Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:3.3V


W25X20AVSNIG Applications
There are a lot of Winbond Electronics
W25X20AVSNIG Memory applications.


telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM
graphics card
hard disk drive (HDD)