ISSI, Integrated Silicon Solution Inc IS25LQ016-JBLE

IS25LQ016-JBLE Overview
Non-Volatile is its memory type. It is available in a case with a Bulk shape. As you can see, it is embedded in 8-SOIC (0.209, 5.30mm Width) case. There is an 16Mb 2M x 8 memory capacity on the chip. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.3V~3.6V is possible to be applied to the supply. There is a recommendation that Surface Mount mounting type should be used for this product. As you can see from the diagram, the chip is planted with 8 terminations. In total, 1 functions are supported by this part. With a clock frequency of 104MHz, the memory rotates on its own. It is encased in an 8-pin package that contains this ic memory chip. It is noted that the operating supply voltage of this memory is 3V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 12mA. By integrating with the SPI-type serial bus, this memory transmits data to the processor. A programming voltage of 2.7V is needed to alter the state of certain nonvolatile memory arrays. Depending on the current that you choose, ic memory chip can run from a maximum of 15mA .

IS25LQ016-JBLE Features
Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins
Operating Supply Voltage:3V


IS25LQ016-JBLE Applications
There are a lot of ISSI, Integrated Silicon Solution Inc
IS25LQ016-JBLE Memory applications.


telecommunications
workstations,
DVD disk buffer
data buffer
nonvolatile BIOS memory
Camcorders
embedded logic
eDRAM
graphics card
hard disk drive (HDD)