Texas Instruments XTR300AIRGWTG4

XTR300AIRGWTG4 Overview
The product is packaged with the materials of Tape & Reel (TR).Sensor and detector interface is used to save space by using the 20-VQFN Exposed Pad package.The characteristics of Output Driver enable it to provide superior performance.This mount is based on the Surface Mount technique.A temperature of -55°C~125°C should be maintained during operation to avoid unnecessary cooling.As an input type, it uses Voltage.20 terminations are used to prevent signals from reflecting off the end of the transmission line.Its base part number of XTR300 can be used to locate related electronic parts.1 functions are configured in it.There is a voltage supply of 20V that is used to operate it.There are 20-pins on the device, so it is an electronic device.Each 20 component pin is designed for a specific purpose.Sensor and detector interface is mounted in the direction of Surface Mount.Sensor and detector interface uses Current as Sensor and detector interfaces output type.The efficiency of the operating supply can be improved if the operating supply current is maintained at 25mA.Sensor and detector interface is likely that failures will occur when the supply voltage exceeds 40V.Failures will occur when the supply voltage is lower than 10V.There are 2 channels designed for the transmission of data.Sensor and detector interface is able to control the output current of 24mA.

XTR300AIRGWTG4 Features
With 20V channels
operate temperature at the range of 25mA

XTR300AIRGWTG4 Applications
There are a lot of Texas Instruments XTR300AIRGWTG4 applications of sensor and detector interfaces.

Mobile Devices
Wearable Fitness
Seatbelt Buckles
Speed Sensing
Engine Knock Detector Signal Processing
Heating and air-conditioning
Large Tank Level Sensing
Automation of Doors
Pressure Calibrators and Controllers
Crankshaft VRS Interfaces