IDT, Integrated Device Technology Inc TSI620-10GIL

Description
The Tsi620 is a device that combines the functionality of a serial RapidIO Switch and a RapidIO-to-PCI bridge. The RapidIO Switch offers 50 Gbps aggregate bandwidth, while the RapidIO-to-PCI bridge enables legacy systems to link to the high-bandwidth RapidIO interconnect. The Tsi620 contains all the benefits of IDT's RapidIO switches and adds interfaces to PCI-enabled processors as well as to low-cost FPGAs.

Features
RapidIO Interface:
Up to three ports in 4x mode
Up to six ports in 1x mode
FPGA Interface:
Supports RapidIO over XGM at 1 to 10 Gbps data rate
PCI Interface:
Operates up to 66 MHz
Supports up to four devices
Low latency with cut-through capability
Enhanced SerDes for low-power solution
High-performance Multicast Engine
Low power:
Leverages Ts57x technology at 120-200mW per RapidIO port
Typical power of less than 4 W
Software compatibility:
RapidIO-to-PCI bridge software compatible with the IDT Tsi108, Tsi109, and Tsi110
RapidIO Switch software compatible with Tsi57x products
Packaging:
27 x 27 mm, 675-pin PBGA
Industrial and commercial temperature operating ranges
Eutectic and RoHS/Green packages
RapidIO Switch:
Configurable baud rate per data lane: 1.25, 2.5, or 3.125 Gbaud/s
10 Gbps inbound and outbound bandwidth at 3.125 Gbaud/s per lane for a 4x mode port
50 Gbps aggregate bandwidth
Loopback support for system testing
Hot-insertion capable I/Ds and hardware support
Per-port power-down modes to reduce power consumption
Lane swap of 4x port to simplify PCB layout
RapidIO interconnect Specification (Revision 1.3) compliant
Up to three Serial RapidIO Ports (4x/1x Mode)
Up to six Serial RapidIO Ports (1x Mode)
66 MHz, 32-bit PCI Bus

Applications
The Tsi620 allows system designers to develop applications with a variety of interfaces. The device is optimized to reduce the design costs for wireless, networking, storage, and military applications.