Texas Instruments TPS23750PWPR

TPS23750PWPR Overview
As part of Tape & Reel (TR), PoE controller is embedded.It is the way it is packaged that makes it 20-PowerTSSOP (0.173, 4.40mm Width).Controller (PD), DC/DC is the type of PoE controller that this is.A strong/weak channel growth trend has been observed: 1.In order to maintain reliability, PoE operates at a temperature of -40°C~85°C.There is a voltage of 0V~67V that is used for the supply voltage of this electrical Po E controller.It is possible to identify its Po E controllers based on its base part number TPS23750.Termination with a 20 termination involves terminating a transmission line with a power over ethernet controller of matching impedance.20 pins are equipped with it.The Po E controller in question is Po E controller of Switching Regulator or Controllers.There is a 20 pin design on this board.There is a peak reflow temperature of 260 for this electrical ethernet power controller.It is recommended that the supply voltage be greater than 48V.It reaches 0.85mA when it receives the maximal current (Isup).1.1mA requires a supply current to function correctly.The frequency of this electrical PoE ethernet controller is 487kHz.28mA is a flexible design because of its high output current.PoE controllers operate at 67V volts.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 1Ohm (Ω). The output power of this ethernet over power controller is 12.95W.

TPS23750PWPR Features
Tape & Reel (TR) package
20 pin count
20 pins
The output current of 28mA
1Ohm (Ω)

TPS23750PWPR Applications
There are a lot of Texas Instruments TPS23750PWPR Power Over Ethernet (PoE) Controllers applications.

VoIP Phones
High Power Wireless Data Systems
Security Cameras
IEEE 802.3bt (Draft) Compliant Devices
Multiband access points
Midspan Applications
Single-Port PSE Power Injectors
Power over Ethernet
IP Phone Power Management
High power (>12.95 W) powered devices