Texas Instruments THS6222IRHFR
- Part Number:
- THS6222IRHFR
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6380943-THS6222IRHFR
- Description:
- Differential broadband PLC and HPLC line driver with common-mode buffer
- Datasheet:
- ths6222
- Number of channels1
- ArchitecturePLC Line Driver
- Total supply voltage ( 5 V = 5±5 V = 10) (max) (V)
- BW at Acl (MHz)128
- Aclmin spec gain (V/V)
- Vn at flatband (typ) (nV√Hz)2.7
- Vn at 1 kHz (typ) (nV√Hz)9
- Iq per channel (typ) (mA)19.5
- Vos (offset voltage at 25°C) (max) (mV)12
- Rail-to-railNo
- FeaturesAdj Bias
- RatingCatalog
- Operating temperature range (°C)-40 to 85
- CMRR (typ) (dB)64
- Input bias current (max) (pA)6000000
- Offset drift (typ) (μV/°C)-40
- GBW (typ) (MHz)128
- Iout (typ) (mA)400
- 2nd harmonic (dBc)98
- 3rd harmonic (dBc)89
- Frequency of harmonic distortion measurement (MHz)1
The THS6222 is a differential line-driver amplifier with a current-feedback architecture manufactured using Texas Instruments proprietary, high-speed, silicon-germanium (SiGe) process. The device is targeted for use in broadband, high-speed, power line communications (HPLC) line driver applications that require high linearity when driving heavy line loads.
The unique architecture of the THS6222 uses minimal quiescent current while achieving very high linearity. The amplifier has an adjustable current pin (IADJ) that sets the nominal current consumption along with the multiple bias modes that allow for enhanced power savings where the full performance of the amplifier is not required. Shutdown bias mode provides further power savings during receive mode in time division multiplexed (TDM) systems while maintaining high output impedance. The integrated midsupply common-mode buffer eliminates external components, reducing system cost and board space.
The wide output swing of 57 VPP (100 Ω load) with32-V power supplies, coupled with over 650 mA current drive (25 Ω load), allows for wide dynamic range that keeps distortion minimal.
The THS6222 is available in a 24-pin VQFN package with exposed thermal pad and is specified for operation from –40°C to 85°C ambient temperature.
ARM Microcontrollers - MCU 256kB Flash 64kB SRAM 55MHz 4 PWM
OEMs, CMs ONLY (NO BROKERS)
DIFFERENTIAL LINE DRIVER
Latest News
-
24 November 2023
An Introduction to the PCA9685 16-Channel Servo Controller Module
Ⅰ. Overview of PCA9685Ⅱ. Manufacturer of PCA9685Ⅲ. Pin configuration of PCA9685Ⅳ. What are the features of PCA9685?Ⅴ. How does the PCA9685 work?Ⅵ. What are the applications of PCA9685?Ⅶ.... -
27 November 2023
TL082 Operational Amplifier Equivalents, Features, TL072 vs TL082 and Applications
Ⅰ. Overview of TL082 operational amplifierⅡ. Features of TL082 operational amplifierⅢ. Pin configuration of TL082 operational amplifierⅣ. How does the output short-circuit protection function of TL082 work?Ⅴ. Functional... -
27 November 2023
BT151 SCR Features, Pin Configuration, Working Principle and Applications
Ⅰ. What is a one-way thyristor?Ⅱ. Overview of BT151Ⅲ. What are the features of BT151?Ⅳ. Footprint and pin configuration of BT151Ⅴ. Technical parameters of BT151Ⅵ. How to measure... -
28 November 2023
An Introduction to LM393 Low Power Dual Voltage Comparator
Ⅰ. What is LM393 comparator?Ⅱ. What are the features of LM393 comparator?Ⅲ. Pin configuration of LM393 comparatorⅣ. Functions of LM393 comparatorⅤ. Technical parameters of LM393 comparatorⅥ. Typical circuit...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.