Texas Instruments SNJ54LS670W
- Part Number:
- SNJ54LS670W
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6389554-SNJ54LS670W
- Description:
- 4-By-4 Register Files With 3-State Outputs
- Datasheet:
- sn54ls670
- Supply voltage (min) (V)4.75
- Supply voltage (max) (V)5.25
- Input typeBipolar
- Output type3-State
- Clock frequency (max) (MHz)35
- FeaturesUnidirectional
- Operating temperature range (°C)-55 to 125
- RatingMilitary
The SN54LS670 and SN74LS670 MSI 16-bit TTL register files incorporate the equivalent of 98 gates. The register file is organized as 4 words of 4 bits each and separate on-chip decoding is provided for addressing the four word locations to either write-in or retrieve data. This permits simultaneous writing into one location and reading from another word location.
Four data inputs are available which are used to supply the 4-bit word to be stored. Location of the word is determined by the write-address inputs A and B in conjunction with a write-enable signal. Data applied at the inputs should be in its true form. That is, if a high-level signal is desired from the output, a high-level is applied at the data input for that particular bit location. The latch inputs are arranged so that new data will be accepted only if both internal address gate inputs are high. When this condition exists, data at the D input is transferred to the latch output. When the write-enable input, G\W, is high, the data inputs are inhibited and their levels can cause no change in the information stored in the internal latches. When the read-enable input, G\R, is high, the data outputs are inhibited and go into the high-impedance state.
The individual address lines permit direct acquisition of data stored in any four of the latches. Four individual decoding gates are used to complete the address for reading a word. When the read address is made in conjunction with the read-enable signal, the word appears at the four outputs.
This arrangement — data-entry addressing separate from data-read addressing and individual sense line — eliminates recovery times, permits simultaneous reading and writing, and is limited in speed only by the write time (27 nanoseconds typical) and the read time (24 nanoseconds typical). The register file has a nondestructive readout in that data is not lost when addressed.
All inputs except read enable and write enable are buffered to lower the drive requirements to one Series 54LS/74LS standard load, and input-clamping diodes minimize switching transients to simplify system design. High-speed, double-ended AND-OR-INVERT gates are employed for the read-address function and have high-sink-current, three-state outputs. Up to 128 of these outputs may be bus connected for increasing the capacity up to 512 words. Any number of these registers may be paralleled to provide n-bit word length.
The SN54LS670 is characterized for operation over the full military temperature range of -55°C to 125°C; the SN74LS670 is characterized for operation from 0°C to 70°C.
Register File Single-Element 4-CH Bipolar 16-Pin CFPAK Tube
Latest News
-
23 November 2023
OP07 Operational Amplifier Features, Pin Configuration and Application Scenarios
Ⅰ. Overview of OP07 operational amplifierⅡ. Features of OP07 operational amplifierⅢ. OP07 symbol, footprint and pin configurationⅣ. Working principle of OP07 operational amplifierⅤ. Differential amplifier circuit of OP07Ⅵ.... -
23 November 2023
AT89C52 Microcontroller Equivalents, Functions, Structure and Applications
Ⅰ. What is AT89C52 microcontroller?Ⅱ. What are the features of AT89C52 microcontroller?Ⅲ. AT89C52 symbol, footprint and pin configurationⅣ. Functions of AT89C52 microcontrollerⅤ. Structure of AT89C52 microcontrollerⅥ. What are... -
24 November 2023
6N136 High Speed Optocoupler Pin Configuration, Features and Working principle
Ⅰ. Overview of 6N136 optocouplerⅡ. Symbol, footprint and pin configuration of 6N136 optocouplerⅢ. Features of 6N136 optocouplerⅣ. Technical parameters of 6N136 optocouplerⅤ. Applications of 6N136 optocouplerⅥ. Working principle... -
24 November 2023
An Introduction to the PCA9685 16-Channel Servo Controller Module
Ⅰ. Overview of PCA9685Ⅱ. Manufacturer of PCA9685Ⅲ. Pin configuration of PCA9685Ⅳ. What are the features of PCA9685?Ⅴ. How does the PCA9685 work?Ⅵ. What are the applications of PCA9685?Ⅶ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.