Texas Instruments 7704201EA
- Part Number:
- 7704201EA
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6389550-7704201EA
- Description:
- 4-By-4 Register Files With 3-State Outputs
- Datasheet:
- sn54ls670
- Supply voltage (min) (V)4.75
- Supply voltage (max) (V)5.25
- Input typeBipolar
- Output type3-State
- Clock frequency (max) (MHz)35
- FeaturesUnidirectional
- Operating temperature range (°C)-55 to 125
- RatingMilitary
The SN54LS670 and SN74LS670 MSI 16-bit TTL register files incorporate the equivalent of 98 gates. The register file is organized as 4 words of 4 bits each and separate on-chip decoding is provided for addressing the four word locations to either write-in or retrieve data. This permits simultaneous writing into one location and reading from another word location.
Four data inputs are available which are used to supply the 4-bit word to be stored. Location of the word is determined by the write-address inputs A and B in conjunction with a write-enable signal. Data applied at the inputs should be in its true form. That is, if a high-level signal is desired from the output, a high-level is applied at the data input for that particular bit location. The latch inputs are arranged so that new data will be accepted only if both internal address gate inputs are high. When this condition exists, data at the D input is transferred to the latch output. When the write-enable input, G\W, is high, the data inputs are inhibited and their levels can cause no change in the information stored in the internal latches. When the read-enable input, G\R, is high, the data outputs are inhibited and go into the high-impedance state.
The individual address lines permit direct acquisition of data stored in any four of the latches. Four individual decoding gates are used to complete the address for reading a word. When the read address is made in conjunction with the read-enable signal, the word appears at the four outputs.
This arrangement — data-entry addressing separate from data-read addressing and individual sense line — eliminates recovery times, permits simultaneous reading and writing, and is limited in speed only by the write time (27 nanoseconds typical) and the read time (24 nanoseconds typical). The register file has a nondestructive readout in that data is not lost when addressed.
All inputs except read enable and write enable are buffered to lower the drive requirements to one Series 54LS/74LS standard load, and input-clamping diodes minimize switching transients to simplify system design. High-speed, double-ended AND-OR-INVERT gates are employed for the read-address function and have high-sink-current, three-state outputs. Up to 128 of these outputs may be bus connected for increasing the capacity up to 512 words. Any number of these registers may be paralleled to provide n-bit word length.
The SN54LS670 is characterized for operation over the full military temperature range of -55°C to 125°C; the SN74LS670 is characterized for operation from 0°C to 70°C.
Register File Single 4-CH Bipolar 16-Pin CDIP Tube
SN54LS670 4-BY-4 REGISTER FILES
Latest News
-
19 October 2023
TIP122 Darlington Transistor: Symbol, Features, Applications and More
Ⅰ. What is Darlington tube?Ⅱ. Overview of TIP122 transistorⅢ. Symbol and footprint of TIP122 transistorⅣ. Technical parameters of TIP122 transistorⅤ. What are the features of TIP122 transistor?Ⅵ. Pin... -
19 October 2023
LM3900N Quadruple Operational Amplifier: Equivalent, Working Principle and LM3900N vs LM3900DR
Ⅰ. Overview of LM3900NⅡ. Symbol and footprint of LM3900NⅢ. Technical parameters of LM3900NⅣ. What are the features of LM3900N?Ⅴ. Pin configuration of LM3900NⅥ. Circuit and working principle of... -
20 October 2023
TNY268PN Switcher: Symbol, Features, Manufacturer and Applications
Ⅰ. Overview of TNY268PN switcherⅡ. TNY268PN symbol, footprint and pin configurationⅢ. Technical parameters of TNY268PN switcherⅣ. What are the features of TNY268PN switcher?Ⅴ. Manufacturer of TNY268PN switcherⅥ. What... -
20 October 2023
A Comprehensive Introduction to MJE2955T Transistor
Ⅰ. Overview of MJE2955T transistorⅡ. Symbol, footprint and pin configuration of MJE2955T transistorⅢ. Technical parameters of MJE2955T transistorⅣ. Features of MJE2955T transistorⅤ. Working principle of MJE2955T transistorⅥ. Absolute...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.