Texas Instruments SN74LVC16244ADLG4

SN74LVC16244ADLG4 Overview
The SSOP package is neat. In order to package this voltage buffer, the Rail/Tube external package is used. The ethernet transceiver has 48 terminations with different functions. There is a voltage requirement of 1.8V. Electronic parts from the LVC/LCX/Z family are used in this part. A total of 48 pins are included with the electric component. This logical driver can be used in Surface Mount different applications. The pin count is 48. 2 ports are included in this logic device. Each element uses 4 bits. Bus Driver/Transceivers is a specific type of buffer. As long as the electronic component is in the quiescent state, it uses 20μA. Operating temperatures as low as -40°C are possible. No more than 125°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 24mA. When operating in high-level output mode, the electronic component can conduct up to -24mA. At the very least, the voltage used to operate this electrical component should be at least 1.65V. There is a 3.6V maximum supply voltage rating on it. In total, 3 signal lines can be output by the logical driver. BUS DRIVER logic ICs are called that. As long as 16 outputs are produced, then it is sufficient. Under ENABLE LOW control, the logical driver starts up.

SN74LVC16244ADLG4 Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC


SN74LVC16244ADLG4 Applications
There are a lot of Texas Instruments
SN74LVC16244ADLG4 Buffers & Transceivers applications.


Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio