Texas Instruments SN74LV126ADRG4

SN74LV126ADRG4 Overview
This package uses SOIC. A logical driver using the Tape and Reel external packaging is used in this application. It is necessary to use all 4 elements. Thebuffer features 14 terminations that serve different purposes. 2.5V is the required supply voltageThis buffer driver is part of the LV/LV-A/LVX/H family of parts. With the electrical component, 14 pins are set. This logical driver is suitable for Surface Mount different applications. In total, it has 14 pins. The transceiver features 2 ports for enhanced functionality. Each element uses 1 bits. Bus Driver/Transceiverss are specifically types of them. During quiescent state, the electronic part uses 20μA. The recommended power supply is 3.3V. A temperature as low as -40°C can be tolerated by this buffer. There should be no more than 125°C ambient temperature for the logical driver to operate. As a low-level output mode, it produces 16mA. During high-level output, the electronic part may conduct -16mA. At least 2V should be used in order to run this automotive buffer on a continuous basis. Approximately 5.5V are the maximum supply voltages. There is an bus transceiver called a BUS DRIVER logic chip. Buffer ICs are controlled by ENABLE HIGH control technology during startup.

SN74LV126ADRG4 Features
Bus Driver/Transceivers
High Level Output: 16mA
Low Level Output: -16mA
BUS DRIVER Logic IC


SN74LV126ADRG4 Applications
There are a lot of Texas Instruments
SN74LV126ADRG4 Buffers & Transceivers applications.


Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
Clock radio
Tuner
Portable radio
Car radio
Satellite radio receiver