Vishay Semiconductor Diodes Division SM6S10A-E3/2D

Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

Polarity refers to the direction of current flow through an electronic component. It is typically indicated by a plus (+) or minus (-) sign on the component's body. Components with polarity must be connected correctly in a circuit to function properly. For example, a diode will only allow current to flow in one direction, from the positive terminal to the negative terminal. If a diode is connected backwards, it will not conduct current.

Breakdown voltage is the maximum voltage that can be applied to an electronic component before it fails. It is typically measured in volts (V). When the breakdown voltage is exceeded, the component will experience a sudden increase in current, which can cause it to overheat and fail. Breakdown voltage is an important parameter to consider when designing electronic circuits, as it determines the maximum voltage that can be applied to the circuit without causing damage.