Silicon Labs SL28SRC02BZI

SL28SRC02BZI Overview
Clock ICs are packaged using the Tube method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. There are a total of 20 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock, Crystal is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 100MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs integrated into this digital clock generator. There are 3.135V~3.465V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in HCSL logic that can be used with this clock generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. The related electrical components for the base part number SL28SRC02 can be found below. A 20 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. A Clock Generators clock generator is essentially what this device is. The output frequency is magnified as high as possible with 2 signal outputs. The thermal destruction of an element may be caused by a supply current exceeding 40mA.

SL28SRC02BZI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V


SL28SRC02BZI Applications
There are a lot of Silicon Labs
SL28SRC02BZI Clock Generators applications.


Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel