Analog Devices Inc. OP97FS-REEL

Name: OP97FS-REEL
Brand: Analog Devices Inc.
SKU: 3194185-OP97FS-REEL
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: OP97FS-REEL

Manufacturer:: Analog Devices Inc.

Ventron No:: 3194185-OP97FS-REEL

Description:: IC OPAMP GP 900KHZ 8SOIC

ECAD Model:

Datasheet:: OP97FS-REEL

Specifications

Analog Devices Inc. OP97FS-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. OP97FS-REEL.

Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Terminal Finish
TIN LEAD
Subcategory
Operational Amplifier
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
15V
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
30
Pin Count
8
JESD-30 Code
R-PDSO-G8
Number of Circuits
1
Current - Supply
380μA
Slew Rate
0.2V/μs
Amplifier Type
General Purpose
Common Mode Rejection Ratio
128 dB
Current - Input Bias
30pA
Voltage - Supply, Single/Dual (±)
±2V~20V
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
900 kHz
Average Bias Current-Max (IIB)
0.00075μA
Supply Voltage Limit-Max
20V
Voltage - Input Offset
30μV
3db Bandwidth
900kHz
Neg Supply Voltage-Max (Vsup)
-20V
Length
4.9mm
RoHS Status
Non-RoHS Compliant

Description

OP97FS-REEL Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In total, there are 1 circuits on this buffer amplifier. This electronic part is recommended to be used with an 380μA supply for best performance.

OP97FS-REEL Features
8 Pins
supply voltage of 15V

OP97FS-REEL Applications
There are a lot of Rochester Electronics, LLC
OP97FS-REEL Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

OP97FS-REEL More Descriptions

Operational Amplifier, 1 Func, 200uV Offset-Max, BIPolar, PDSO8
Non-RoHS Compliant R-PDSO-G8 TIN LEAD Tape & Reel (TR) op amp buffer circuit 4.9mm 0.00075muA -20V 900kHz
OP Amp Single GP ±20V 8-Pin SOIC N T/R
Precision Amplifiers Low Power Hi Prec IC 600uA Max
The OP-97 is a low-power alternative to the industry-standard OP-07 precision amplifier. The OP-97 maintains the standards of performance set by the OP-07 while utilizing only 600µA supply current, less than 1/6 that of an OP-07. Offset voltage is an ultra-low 25µV, and drift over temperature is below 0.6µV/°C. External offset trimming is not required in the majority of circuits. Improvements have been made over OP-07 specifications in several areas. Notable is bias current, which remains below 250pA over the full military temperature range. The OP-97 is ideal for use in precision long-term integrators or sample-and-hold circuits that must operate at elevated temperatures. Common-mode rejection and power-supply rejection are also improved with the OP-97, at 114dB minimum over wider ranges of common-mode or supply voltage. Outstanding PSR, a supply range specified from ±2.25V to ±20V and the OP-97's minimal power requirements combine to make the OP-97 a preferred device for portable and battery-powered instruments. The OP-97 conforms to the OP-07 pinout, with the null potentimeter connected between pins 1 and 8 with the wiper to V . The OP-97 will upgrade circuit designs using 725, OP05, OP07, OP12, and 1012 type amplifiers. It may replace 741-type amplifiers in circuits without nullling or where the nulling circuitry has been removed.

Certification