Analog Devices Inc. MUX08EP
- Part Number:
- MUX08EP
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3671989-MUX08EP
- Description:
- IC MULTIPLEXER 8X1 16DIP
- Datasheet:
- MUX-08,24
Analog Devices Inc. MUX08EP technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. MUX08EP.
- Mounting TypeThrough Hole
- Package / Case16-DIP (0.300, 7.62mm)
- Surface MountNO
- Number of Pins16
- Operating Temperature0°C~70°C TA
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations16
- ECCN CodeEAR99
- Resistance300Ohm
- SubcategoryMultiplexer or Switches
- TechnologyJFET
- Terminal PositionDUAL
- Number of Functions1
- Supply Voltage15V
- Terminal Pitch2.54mm
- Base Part NumberMUX08
- OutputCOMMON OUTPUT
- Pin Count16
- Operating Supply Voltage15V
- Number of Channels8
- Number of Circuits1
- Analog IC - Other TypeSINGLE-ENDED MULTIPLEXER
- Power Dissipation247mW
- Throw ConfigurationDPST
- Propagation Delay1.5 μs
- Turn On Delay Time2 μs
- Neg Supply Voltage-Nom (Vsup)-15V
- Turn-Off Delay Time2 μs
- Max Dual Supply Voltage18V
- On-State Resistance (Max)300Ohm
- Multiplexer/Demultiplexer Circuit8:1
- Off-state Isolation-Nom60 dB
- Current - Leakage (IS(off)) (Max)1nA
- Channel Capacitance (CS(off), CD(off))2.5pF 7pF
- On-state Resistance Match-Nom40Ohm
- Switch Time (Ton, Toff) (Max)2μs, 400ns
- Channel-to-Channel Matching (ΔRon)21 Ω
- Crosstalk-70dB @ 500kHz
- SwitchingBREAK-BEFORE-MAKE
- Switch-on Time-Max2000ns
- Switch-off Time-Max400ns
- Drain to Source Resistance400Ohm
- Normal PositionNO
- Signal Current-Max0.025A
- Height Seated (Max)5.33mm
- Width7.62mm
- Radiation HardeningNo
- REACH SVHCUnknown
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
MUX08EP Overview
The manufacturer of this component is Analog Devices Inc. It is a chip that falls under the category of Interface - Analog Switches, Multiplexers, Demultiplexers. It is not designed for surface mounting and is currently considered obsolete. The ECCN Code for this chip is EAR99, indicating that it does not require an export license. It utilizes JFET technology and has a propagation delay of 1.5 μs. The turn on delay time is 2 μs and the maximum switch-on time is 2000ns. The maximum switch-off time is 400ns. This chip is not designed to withstand radiation and is not compliant with RoHS regulations.
MUX08EP Features
8 Channels
Drain-to-Source resistance: 400Ohm
MUX08EP Applications
There are a lot of Analog Devices Inc. MUX08EP Analog Switches & Multiplexers ICs applications.
Data Acquisition Systems
Precision test equipment
Industrial
PBX interfaces
Digital Cross-Connects
Optical Applications
Imaging
Microwave transmission systems
Communication systems
Avionics
The manufacturer of this component is Analog Devices Inc. It is a chip that falls under the category of Interface - Analog Switches, Multiplexers, Demultiplexers. It is not designed for surface mounting and is currently considered obsolete. The ECCN Code for this chip is EAR99, indicating that it does not require an export license. It utilizes JFET technology and has a propagation delay of 1.5 μs. The turn on delay time is 2 μs and the maximum switch-on time is 2000ns. The maximum switch-off time is 400ns. This chip is not designed to withstand radiation and is not compliant with RoHS regulations.
MUX08EP Features
8 Channels
Drain-to-Source resistance: 400Ohm
MUX08EP Applications
There are a lot of Analog Devices Inc. MUX08EP Analog Switches & Multiplexers ICs applications.
Data Acquisition Systems
Precision test equipment
Industrial
PBX interfaces
Digital Cross-Connects
Optical Applications
Imaging
Microwave transmission systems
Communication systems
Avionics
MUX08EP More Descriptions
Multiplexer Switch ICs IC 8-CH Mono OverVTG & Pwr Supply Protect
Analog Multiplexer Single 8:1 16-Pin PDIP N Tube
Single-Ended Multiplexer, 1 Func, 8 Channel, JFET, PDSO16
French Electronic Distributor since 1988
8-CHANNEL BIFET ANALOG MU, TUBE
The MUX-08 is a monolithic eight-channel analog multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-bit binary address. The MUX-24 is a monolithic four-channel differential analog multiplexer configured in a double pole, four position (plus OFF) electronic switch array. A two-bit binary input address connects a pair of independent analog inputs from each four channel input section to the corresponding pair of independent analog outputs. All switches in the MUX-08/MUX-24 are turned OFF by applying logic "0" to the ENABLE pin, thereby providing a package select funtion. Fabricated with Precision Monolithics' high performance Bipolar-JFET technology, these devices offer low, constant "ON" resistance, low leakage currents and fast settling time with low crosstalk to satisfy a wide variety of applications. These multiplexors do not suffer from latch-up or static charge blow-out problems associated with similar CMOS parts. The digital inputs are designed to operate form both TTL and CMOS levels while always providing a definite break-before-make action without the need for external pull-up resistors over the full operating temperature range.
Analog Multiplexer Single 8:1 16-Pin PDIP N Tube
Single-Ended Multiplexer, 1 Func, 8 Channel, JFET, PDSO16
French Electronic Distributor since 1988
8-CHANNEL BIFET ANALOG MU, TUBE
The MUX-08 is a monolithic eight-channel analog multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-bit binary address. The MUX-24 is a monolithic four-channel differential analog multiplexer configured in a double pole, four position (plus OFF) electronic switch array. A two-bit binary input address connects a pair of independent analog inputs from each four channel input section to the corresponding pair of independent analog outputs. All switches in the MUX-08/MUX-24 are turned OFF by applying logic "0" to the ENABLE pin, thereby providing a package select funtion. Fabricated with Precision Monolithics' high performance Bipolar-JFET technology, these devices offer low, constant "ON" resistance, low leakage currents and fast settling time with low crosstalk to satisfy a wide variety of applications. These multiplexors do not suffer from latch-up or static charge blow-out problems associated with similar CMOS parts. The digital inputs are designed to operate form both TTL and CMOS levels while always providing a definite break-before-make action without the need for external pull-up resistors over the full operating temperature range.
The three parts on the right have similar specifications to MUX08EP.
-
ImagePart NumberManufacturerMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeResistanceSubcategoryTechnologyTerminal PositionNumber of FunctionsSupply VoltageTerminal PitchBase Part NumberOutputPin CountOperating Supply VoltageNumber of ChannelsNumber of CircuitsAnalog IC - Other TypePower DissipationThrow ConfigurationPropagation DelayTurn On Delay TimeNeg Supply Voltage-Nom (Vsup)Turn-Off Delay TimeMax Dual Supply VoltageOn-State Resistance (Max)Multiplexer/Demultiplexer CircuitOff-state Isolation-NomCurrent - Leakage (IS(off)) (Max)Channel Capacitance (CS(off), CD(off))On-state Resistance Match-NomSwitch Time (Ton, Toff) (Max)Channel-to-Channel Matching (ΔRon)CrosstalkSwitchingSwitch-on Time-MaxSwitch-off Time-MaxDrain to Source ResistanceNormal PositionSignal Current-MaxHeight Seated (Max)WidthRadiation HardeningREACH SVHCRoHS StatusLead FreeFactory Lead TimeLifecycle StatusTerminal FinishAdditional FeatureMax Power DissipationInterfaceOperating Supply CurrentNumber of InputsHeightLengthView Compare
-
MUX08EPThrough Hole16-DIP (0.300, 7.62mm)NO160°C~70°C TATubee0noObsolete1 (Unlimited)16EAR99300OhmMultiplexer or SwitchesJFETDUAL115V2.54mmMUX08COMMON OUTPUT1615V81SINGLE-ENDED MULTIPLEXER247mWDPST1.5 μs2 μs-15V2 μs18V300Ohm8:160 dB1nA2.5pF 7pF40Ohm2μs, 400ns21 Ω-70dB @ 500kHzBREAK-BEFORE-MAKE2000ns400ns400OhmNO0.025A5.33mm7.62mmNoUnknownNon-RoHS CompliantContains Lead-----------
-
Through Hole16-DIP (0.300, 7.62mm)NO16-40°C~85°C TATubee3noActive1 (Unlimited)16EAR99300Ohm-JFETDUAL115V2.54mmMUX08-16-81SINGLE-ENDED MULTIPLEXER247mWDPST---15V-18V300Ohm8:160 dB1nA2.5pF 7pF27Ohm2μs, 400ns21 Ω-70dB @ 500kHz-2000ns400ns400Ohm---6.35mmNoNo SVHCROHS3 CompliantContains Lead8 WeeksPRODUCTION (Last Updated: 3 weeks ago)Matte Tin (Sn)OVERVOLTAGE PROTECTION500mWParallel6mA83.3mm20.07mm
-
Through Hole16-CDIP (0.300, 7.62mm)NO16-25°C~85°C TATubee0noActive1 (Unlimited)16EAR99400OhmMultiplexer or SwitchesJFETDUAL115V2.54mmMUX08-1615V81SINGLE-ENDED MULTIPLEXER247mWDPST1.5 μs2 μs-15V2 μs18V300Ohm8:160 dB1nA2.5pF 7pF27Ohm2μs, 400ns21 Ω-70dB @ 500kHzBREAK-BEFORE-MAKE2000ns400ns--0.025A-7.62mmNoUnknownNon-RoHS CompliantContains Lead8 WeeksPRODUCTION (Last Updated: 2 weeks ago)Tin/Lead (Sn63Pb37)OVERVOLTAGE PROTECTION-Parallel-8--
-
Through Hole16-DIP (0.300, 7.62mm)NO16-40°C~85°C TATubee0noObsolete1 (Unlimited)16EAR99300OhmMultiplexer or SwitchesJFETDUAL115V2.54mmMUX08COMMON OUTPUT1615V81SINGLE-ENDED MULTIPLEXER247mWDPST1.5 μs2 μs-15V2 μs18V300Ohm8:160 dB1nA2.5pF 7pF75Ohm2μs, 400ns21 Ω-70dB @ 500kHzBREAK-BEFORE-MAKE2000ns400ns-NO0.025A5.33mm7.62mmNo-Non-RoHS CompliantContains Lead----------
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
31 October 2023
STM32F407VET6 Microcontroller: Symbol, Features, Working Principle
Ⅰ. What is STM32F407VET6 microcontroller?Ⅱ. Symbol, footprint and pin configuration of STM32F407VET6 microcontrollerⅢ. Technical parameters of STM32F407VET6 microcontrollerⅣ. Features of STM32F407VET6 microcontrollerⅤ. Dimension and package of STM32F407VET6 microcontrollerⅥ.... -
01 November 2023
Power MOSFET IRFP460: Manufacturer, Technical Parameters and Applications
Ⅰ. Overview of IRFP460Ⅱ. Manufacturer of IRFP460Ⅲ. Symbol, footprint and pin configuration of IRFP460Ⅳ. What are the features of IRFP460?Ⅴ. Technical parameters of IRFP460Ⅵ. What are the parallel... -
01 November 2023
Do You Know the CD4046BE CMOS Micropower Phase Locked Loop?
Ⅰ. What is a phase locked loop?Ⅱ. Overview of CD4046BEⅢ. Symbol, footprint and pin configuration of CD4046BEⅣ. What are the features of CD4046BE?Ⅴ. Technical parameters of CD4046BEⅥ. How... -
02 November 2023
MPX2010DP Pressure Sensor: Manufacturer, Pin Configuration, and Applications
Ⅰ. What is a pressure sensor?Ⅱ. Overview of MPX2010DP pressure sensorⅢ. Manufacturer of MPX2010DP pressure sensorⅣ. MPX2010DP symbol, footprint and pin configurationⅤ. Features of MPX2010DP pressure sensorⅥ. Technical...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.