MCP1725T-1202E/MC

Microchip Technology MCP1725T-1202E/MC

Part Number:
MCP1725T-1202E/MC
Manufacturer:
Microchip Technology
Ventron No:
3762825-MCP1725T-1202E/MC
Description:
IC REG LDO 1.2V 0.5A 8DFN
ECAD Model:
Datasheet:
MCP1725T-1202E/MC

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Overview
Description
The MCP1725 is a 500 mA Low Dropout (LDO) linear regulator that provides high current and low output voltages in a very small package. It comes in a fixed (or adjustable) output voltage version, with an output voltage range of 0.8V to 5.0V. The 500 mA output current capability, combined with the low output voltage capability, makes the MCP1725 a good choice for new sub-1.8V output voltage LDO applications that have high current demands.
The MCP1725 is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1 uF of output capacitance is needed to stabilize the LDO.
Using CMOS construction, the quiescent current consumed by the MCP1725 is typically less than 120 μA over the entire input voltage range, making it attractive for portable computing applications that demand high output current. When shut down, the quiescent current is reduced to less than 0.1 μA.
The scaled-down output voltage is internally monitored and a power good (PWRGD) output is provided when the output is within 92% of regulation (typical). An external capacitor can be used on the CDELAY pin to adjust the delay from 200 μs to 300 ms.
The overtemperature and short circuit current-limiting provide additional protection for the LDO during system fault conditions.

Features
500 mA Output Current Capability
Input Operating Voltage Range: 2.3V to 6.0V
Adjustable Output Voltage Range: 0.8V to 5.0V
Standard Fixed Output Voltages: -0.8V, 1.2V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
Other Fixed Output Voltage Options Available Upon Request
Low Dropout Voltage: 210 mV typical at 500 mA
Typical Output Voltage Tolerance: 0.5%
Stable with 1.0 uF Ceramic Output Capacitor
Fast response to Load Transients
Low Supply Current: 120 μA (typical)
Low Shutdown Supply Current: 0.1 μA (typical)
Adjustable Delay on Power Good Output
Short Circuit Current Limiting and Overtemperature Protection
2x3 DFN-8 and SOIC-8 Package Options

Applications
High-Speed Driver Chipset Power
Networking Backplane Cards
Notebook Computers
Network Interface Cards
Palmtop Computers
Video Graphics Adapters
2.5V to 1.XV Regulators
Specifications
Microchip Technology MCP1725T-1202E/MC technical specifications, attributes, parameters and parts with similar specifications to Microchip Technology MCP1725T-1202E/MC.
  • Factory Lead Time
    13 Weeks
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    8-VFDFN Exposed Pad
  • Operating Temperature
    -40°C~125°C
  • Packaging
    Tape & Reel (TR)
  • Published
    2008
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Other Regulators
  • Packing Method
    TAPE AND REEL
  • Technology
    CMOS
  • Terminal Position
    DUAL
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Terminal Pitch
    0.5mm
  • Reflow Temperature-Max (s)
    40
  • Base Part Number
    MCP1725
  • Pin Count
    8
  • JESD-30 Code
    R-PDSO-N8
  • Number of Outputs
    1
  • Voltage - Input (Max)
    6V
  • Output Voltage
    1.2V
  • Output Type
    Fixed
  • Max Output Current
    500mA
  • Output Configuration
    Positive
  • Quiescent Current
    220μA
  • Control Features
    Enable, Power Good
  • Accuracy
    2 %
  • Output Voltage 1
    1.2V
  • Number of Regulators
    1
  • Min Input Voltage
    2.3V
  • Protection Features
    Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)
  • Voltage Dropout (Max)
    0.35V @ 500mA
  • PSRR
    60dB (100Hz)
  • Dropout Voltage
    210mV
  • Dropout Voltage1-Nom
    0.21V
  • Min Output Voltage
    1.2V
  • Voltage Tolerance-Max
    2%
  • Input Bias Current
    120μA
  • Length
    3mm
  • Width
    2mm
  • Radiation Hardening
    No
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.