MAX491EEPD

Maxim Integrated MAX491EEPD

Part Number:
MAX491EEPD
Manufacturer:
Maxim Integrated
Ventron No:
3675955-MAX491EEPD
Description:
IC TXRX RS485/RS422 14-DIP
ECAD Model:
Datasheet:
MAX491EEPD

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Maxim Integrated MAX491EEPD technical specifications, attributes, parameters and parts with similar specifications to Maxim Integrated MAX491EEPD .
  • Factory Lead Time
    6 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    14-DIP (0.300, 7.62mm)
  • Number of Pins
    14
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tube
  • Published
    2005
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    14
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Line Driver or Receivers
  • Max Power Dissipation
    800mW
  • Technology
    CMOS
  • Voltage - Supply
    4.75V~5.25V
  • Terminal Position
    DUAL
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch
    2.54mm
  • Base Part Number
    MAX491
  • Pin Count
    14
  • Output Voltage
    12.5V
  • Operating Supply Voltage
    5V
  • Power Supplies
    5V
  • Interface
    RS-422, RS-485
  • Nominal Supply Current
    500μA
  • Logic Function
    Receiver, Transceiver
  • Data Rate
    2.5Mbps
  • Differential Output
    YES
  • Output Polarity
    COMPLEMENTARY
  • Protocol
    RS422, RS485
  • Input Characteristics
    DIFFERENTIAL SCHMITT TRIGGER
  • Number of Drivers/Receivers
    1/1
  • Driver Number of Bits
    1
  • Receiver Number of Bits
    1
  • Duplex
    Full
  • Receiver Hysteresis
    70mV
  • Number of Transceivers
    1
  • Simplex/Duplex
    Full Duplex
  • Transmit Delay-Max
    60 ns
  • Output Low Current-Max
    0.004A
  • High Level Input Current-Max
    0.000002A
  • Height
    4.45mm
  • Length
    19.43mm
  • Width
    7.87mm
  • Radiation Hardening
    No
  • REACH SVHC
    Unknown
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
MAX491EEPD Overview
LED drivers with the enhanced 14-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.In the Tube package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.A Through Hole-type PCB or development board can be used to place this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.This integrated circuit has 14 terminations designed for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number MAX491 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Through Hole mounting technologies, its package size has been greatly reduced.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory named Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.Wide receiver provides the output voltage of 12.5V.

MAX491EEPD Features
Tube package
14 pin count
14 pins
5V power supply

MAX491EEPD Applications
There are a lot of Maxim Integrated MAX491EEPD Drivers/Receivers/Transceivers applications.

Long-distance fiber optic network applications
Single to Multimode Fiber Conversion
VoIP phones
Shortwave receiver
Wireless interactive experience
Switches
Tuner
TV signal transmission
Routers
Remote controls
MAX491EEPD More Descriptions
MAX491E Series 2.5 Mbps 12 V Full Duplex RS 485 Transceiver - DIP-14
±15kV ESD-Protected, Slew-Rate-Limited, Low-Power, RS-485/RS-422 Transceivers
e3 MAX491 Tube RS422RS485 interface transceiver 5V 0.000002A 4.45mm 60ns
RS422/RS485 TXRX, 2.5MBPS, 5.25V, DIP-14; IC Type:RS422 / RS485 Transceiver; No. of Receivers:1Receivers; No. of Transmitters:1; Communication Mode:Full Duplex; Data Rate Max:2.5Mbps; Supply Voltage Min:4.75V; IC Case / Package:DIP RoHS Compliant: Yes
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.