Maxim Integrated MAX1136EUA
- Part Number:
- MAX1136EUA
- Manufacturer:
- Maxim Integrated
- Ventron No:
- 3007738-MAX1136EUA
- Description:
- IC ADC 10-BIT I2C 94.4K 8-UMAX
- Datasheet:
- MAX1136EUA
Description
The MAX1136-MAX1139 are low-power, 10-bit, multichannel analog-to-digital converters (ADCs) with internal track/hold (T/H), voltage reference, clock, and an I2C-compatible 2-wire serial interface. These devices operate from a single supply of 2.7V to 3.6V (MAX1137/MAX1139) or 4.5V to 5.5V (MAX1136/MAX1138) and require only 670uA at the maximum sampling rate of 94.4ksps. Supply current falls below 230μA for sampling rates under 46ksps. AutoShutdown powers down the devices between conversions, reducing supply current to less than 1μA at low throughput rates. The MAX1136/MAX1137 have four analog input channels each, while the MAX1138/MAX1139 have 12 analog input channels each. The fully differential analog inputs are software configurable for unipolar or bipolar, and single-ended or differential operation. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX1137/MAX1139 feature a 2.048V internal reference and the MAX1136/MAX1138 feature a 4.096V internal reference. The MAX1136/MAX1137 are available in an 8-pin μMAX® package. The MAX1138/MAX1139 are available in a 16-pin QSOP package. The MAX1136-MAX1139 are guaranteed over the extended temperature range (-40°C to 85°C).
Features
High-Speed I2C-Compatible Serial Interface
400kHz Fast Mode
1.7MHz High-Speed Mode
Single-Supply
2.7V to 3.6V (MAX1137/MAX1139)
4.5V to 5.5V (MAX1136/MAX1138)
Internal Reference
2.048V (MAX1137/MAX1139)
4.096V (MAX1136/MAX1138)
External Reference: 1V to VDD
Internal Clock
4-Channel Single-Ended or 2-Channel Fully Differential (MAX1136/MAX1137)
12-Channel Single-Ended or 6-Channel Fully Differential (MAX1138/MAX1139)
Internal FIFO with Channel-Scan Mode
Low Power
670μA at 94.4ksps
230μA at 40ksps
60μA at 10ksps
6μA at 1ksps
0.5μA in Power-Down Mode
Software-Configurable Unipolar/Bipolar
Small Packages
8-Pin μMAX (MAX1136/MAX1137)
16-Pin QSOP (MAX1138/MAX1139)
Applications
Hand-Held Portable Applications
Medical Instruments
Solar-Powered Remote Systems
Received-Signal-Strength Indicators
Battery-Powered Test Equipment
System Supervision
The MAX1136-MAX1139 are low-power, 10-bit, multichannel analog-to-digital converters (ADCs) with internal track/hold (T/H), voltage reference, clock, and an I2C-compatible 2-wire serial interface. These devices operate from a single supply of 2.7V to 3.6V (MAX1137/MAX1139) or 4.5V to 5.5V (MAX1136/MAX1138) and require only 670uA at the maximum sampling rate of 94.4ksps. Supply current falls below 230μA for sampling rates under 46ksps. AutoShutdown powers down the devices between conversions, reducing supply current to less than 1μA at low throughput rates. The MAX1136/MAX1137 have four analog input channels each, while the MAX1138/MAX1139 have 12 analog input channels each. The fully differential analog inputs are software configurable for unipolar or bipolar, and single-ended or differential operation. The full-scale analog input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX1137/MAX1139 feature a 2.048V internal reference and the MAX1136/MAX1138 feature a 4.096V internal reference. The MAX1136/MAX1137 are available in an 8-pin μMAX® package. The MAX1138/MAX1139 are available in a 16-pin QSOP package. The MAX1136-MAX1139 are guaranteed over the extended temperature range (-40°C to 85°C).
Features
High-Speed I2C-Compatible Serial Interface
400kHz Fast Mode
1.7MHz High-Speed Mode
Single-Supply
2.7V to 3.6V (MAX1137/MAX1139)
4.5V to 5.5V (MAX1136/MAX1138)
Internal Reference
2.048V (MAX1137/MAX1139)
4.096V (MAX1136/MAX1138)
External Reference: 1V to VDD
Internal Clock
4-Channel Single-Ended or 2-Channel Fully Differential (MAX1136/MAX1137)
12-Channel Single-Ended or 6-Channel Fully Differential (MAX1138/MAX1139)
Internal FIFO with Channel-Scan Mode
Low Power
670μA at 94.4ksps
230μA at 40ksps
60μA at 10ksps
6μA at 1ksps
0.5μA in Power-Down Mode
Software-Configurable Unipolar/Bipolar
Small Packages
8-Pin μMAX (MAX1136/MAX1137)
16-Pin QSOP (MAX1138/MAX1139)
Applications
Hand-Held Portable Applications
Medical Instruments
Solar-Powered Remote Systems
Received-Signal-Strength Indicators
Battery-Powered Test Equipment
System Supervision
Maxim Integrated MAX1136EUA technical specifications, attributes, parameters and parts with similar specifications to Maxim Integrated MAX1136EUA .
- Factory Lead Time6 Weeks
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Number of Pins8
- Operating Temperature-40°C~85°C
- PackagingTube
- Published2011
- JESD-609 Codee4
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- Terminal FinishNickel/Palladium/Gold (Ni/Pd/Au)
- SubcategoryAnalog to Digital Converters
- Max Power Dissipation3.35mW
- TechnologyBICMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Supply Voltage5V
- Terminal Pitch0.65mm
- Reflow Temperature-Max (s)30
- Base Part NumberMAX1136
- Pin Count8
- PolarityBipolar, Unipolar
- Power Supplies5V
- ConfigurationMUX-S/H-ADC
- Number of Channels4
- InterfaceI2C, Serial
- Max Supply Voltage5.5V
- Min Supply Voltage4.5V
- Number of Bits10
- Input TypeDifferential, Single Ended
- ArchitectureSAR
- Number of Inputs2, 4
- Converter TypeADC, SUCCESSIVE APPROXIMATION
- Supply TypeSingle
- Reference Voltage4.096V
- Reference TypeExternal, Internal
- Data InterfaceI2C
- Resolution1.25 B
- Sampling Rate94.4 ksps
- Voltage - Supply, Analog5V
- Number of Analog In Channels4
- Sampling Rate (Per Second)94.4k
- Output Bit CodeBINARY, 2'S COMPLEMENT BINARY
- Linearity Error-Max (EL)0.0977%
- Integral Nonlinearity (INL)1 LSB
- Sample and Hold / Track and HoldTRACK
- Number of A/D Converters1
- Conversion Rate94.4 ksps
- Ratio - S/H:ADC1:1
- Height950μm
- Length3.05mm
- Width3.05mm
- Radiation HardeningNo
- REACH SVHCUnknown
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
23 November 2023
OP07 Operational Amplifier Features, Pin Configuration and Application Scenarios
Ⅰ. Overview of OP07 operational amplifierⅡ. Features of OP07 operational amplifierⅢ. OP07 symbol, footprint and pin configurationⅣ. Working principle of OP07 operational amplifierⅤ. Differential amplifier circuit of OP07Ⅵ.... -
23 November 2023
AT89C52 Microcontroller Equivalents, Functions, Structure and Applications
Ⅰ. What is AT89C52 microcontroller?Ⅱ. What are the features of AT89C52 microcontroller?Ⅲ. AT89C52 symbol, footprint and pin configurationⅣ. Functions of AT89C52 microcontrollerⅤ. Structure of AT89C52 microcontrollerⅥ. What are... -
24 November 2023
6N136 High Speed Optocoupler Pin Configuration, Features and Working principle
Ⅰ. Overview of 6N136 optocouplerⅡ. Symbol, footprint and pin configuration of 6N136 optocouplerⅢ. Features of 6N136 optocouplerⅣ. Technical parameters of 6N136 optocouplerⅤ. Applications of 6N136 optocouplerⅥ. Working principle... -
24 November 2023
An Introduction to the PCA9685 16-Channel Servo Controller Module
Ⅰ. Overview of PCA9685Ⅱ. Manufacturer of PCA9685Ⅲ. Pin configuration of PCA9685Ⅳ. What are the features of PCA9685?Ⅴ. How does the PCA9685 work?Ⅵ. What are the applications of PCA9685?Ⅶ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.