STMicroelectronics M95512-DWDW4TP/K

M95512-DWDW4TP/K Overview
In terms of its memory type, it can be classified as Non-Volatile. Cut Tape (CT)-cases are available. An embedded 8-TSSOP (0.173, 4.40mm Width) case surrounds memory ics. 512Kb 64K x 8 is the chip's memory size. This device uses a EEPROM-format memory, which is of mainstream design. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. A voltage of 2.5V~5.5V is possible to be applied to the supply. The recommended mounting type for memory ics is Surface Mount. The chip contains 8 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 5V of power. During the rotation of the clock, the ic memory chip is set as 16MHz. In order to select similar parts, typical manufacturers refer to M95512 as the device's base part number. The memory device is enclosed in a package with an 8-pin connector. This memory device has 8 pins, indicating it has 8 memory locations. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. As far as its nominal supply current is concerned, this memory component carries a rating of 4mA. There is only a single power supply required for this memory chip. It is an important component of the Automotive, AEC-Q100 series memory devices used in a variety of applications. By integrating with the SPI-type serial bus, this memory transmits data to the processor.

M95512-DWDW4TP/K Features
Package / Case: 8-TSSOP (0.173, 4.40mm Width)
8 Pins

M95512-DWDW4TP/K Applications
There are a lot of STMicroelectronics M95512-DWDW4TP/K Memory applications.

printers
Cache memory
hard disk drive (HDD)
supercomputers
mainframes
DVD disk buffer
personal computers
personal digital assistants
eDRAM
multimedia computers