Texas Instruments LM5070MTC-50
- Part Number:
- LM5070MTC-50
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3267308-LM5070MTC-50
- Description:
- IC PD POE CONTROLLER 16TSSOP
- Datasheet:
- LM5070MTC-50
Texas Instruments LM5070MTC-50 technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM5070MTC-50.
- MountSurface Mount
- Package / Case16-TSSOP (0.173, 4.40mm Width)
- Number of Pins16
- Operating Temperature-40°C~125°C
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusDiscontinued
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations16
- ECCN CodeEAR99
- Terminal FinishTin/Lead (Sn/Pb)
- SubcategorySwitching Regulator or Controllers
- TechnologyBICMOS
- Voltage - Supply1.8V~75V
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Frequency580kHz
- Base Part NumberLM5070
- Pin Count16
- Output Voltage3.3V
- Output TypeVoltage
- Input Voltage-Nom48V
- Number of Channels1
- Nominal Supply Current1.5mA
- Output Current100mA
- Output Power13W
- Max Output Voltage3.3V
- Min Input Voltage1.85V
- Control ModeCURRENT-MODE
- Max Input Voltage75V
- Control TechniquePULSE WIDTH MODULATION
- Nominal Input Voltage48V
- Switcher ConfigurationSINGLE
- Continuous Drain Current (ID)1mA
- Internal Switch(s)Both
- Standards802.3af (PoE)
- Drain to Source Resistance1Ohm
- Duty Cycle50 %
- Auxiliary SenseNo
- Height900μm
- Length5mm
- Width4.4mm
- REACH SVHCNo SVHC
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
LM5070MTC-50 Overview
The product is packaged in a 16-TSSOP case, with dimensions of 0.173 inches and 4.40mm width. It features a single function and offers an output current of 100mA, providing a power output of 13W. The control mode employed is CURRENT-MODE, while the control technique utilized is PULSE WIDTH MODULATION. The maximum input voltage supported is 75V, with a nominal input voltage of 48V. The product does not include an auxiliary sense feature. It is important to note that this product is Non-RoHS compliant, meaning it does not adhere to the Restriction of Hazardous Substances directive.
LM5070MTC-50 Features
Tube package
16 pin count
16 pins
The output current of 100mA
LM5070MTC-50 Applications
There are a lot of Texas Instruments LM5070MTC-50 Power Over Ethernet (PoE) Controllers applications.
Power over Ethernet
Dual Signature PD/Forced UPOE
POS Terminals
Security Cameras
VoIP Phones
Outdoor Security Camera Equipment
Public Information Displays
Higher Power Ethernet Powered Devices
Industrial Automation Equipment
Multiband access points
The product is packaged in a 16-TSSOP case, with dimensions of 0.173 inches and 4.40mm width. It features a single function and offers an output current of 100mA, providing a power output of 13W. The control mode employed is CURRENT-MODE, while the control technique utilized is PULSE WIDTH MODULATION. The maximum input voltage supported is 75V, with a nominal input voltage of 48V. The product does not include an auxiliary sense feature. It is important to note that this product is Non-RoHS compliant, meaning it does not adhere to the Restriction of Hazardous Substances directive.
LM5070MTC-50 Features
Tube package
16 pin count
16 pins
The output current of 100mA
LM5070MTC-50 Applications
There are a lot of Texas Instruments LM5070MTC-50 Power Over Ethernet (PoE) Controllers applications.
Power over Ethernet
Dual Signature PD/Forced UPOE
POS Terminals
Security Cameras
VoIP Phones
Outdoor Security Camera Equipment
Public Information Displays
Higher Power Ethernet Powered Devices
Industrial Automation Equipment
Multiband access points
LM5070MTC-50 More Descriptions
Integrated Power Over Ethernet PD Interface and PWM Controller 16-TSSOP -40 to 125
IC, POE INTERFACE PWM, POWERWISE; Input Voltage:48V; Output Current:100mA; Supply Current:1.5mA; Digital IC Case Style:TSSOP; No. of Pins:16; Duty Cycle (%):50%; UVLO:6.25V; Frequency:580kHz; Operating Temperature Range:-40°C to 125°C; SVHC:No SVHC (19-Dec-2011); Base Number:5070; Continuous Drain Current Id:1mA; Controller Type:PWM; IC Generic Number:5070; Input Voltage Max:75V; Input Voltage Min:1.85V; Logic Function Number:5070; On Resistance Rds(on):1ohm; Operating Frequency:200Hz; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Output Type:Voltage; Output Voltage Max:3.3V; Package / Case:TSSOP; Power Supply IC Type:PoE and PWM; Startup Current:10µA; Supply Voltage Max:15V; Supply Voltage Min:8.1V; Termination Type:SMD
The LM5070 power interface port and pulse width modulation (PWM) controller provides a complete integrated solution for Powered Devices (PD) that connect into Power over Ethernet (PoE) systems. The LM5070 integrates an 80V, 400mA line connection switch and associated control for a fully IEEE 802.3af compliant interface with a full featured current mode pulse width modulator dc-dc converter. All power sequencing requirements between the controller interface and switch mode power supply (SMPS) are integrated into the IC. Two options are available providing either an 80% maximum duty cycle limit with slope compensation (on the -80 suffix) device or a 50% maximum duty cycle limit and no slope compensation on the (-50 suffix) device.
IC, POE INTERFACE PWM, POWERWISE; Input Voltage:48V; Output Current:100mA; Supply Current:1.5mA; Digital IC Case Style:TSSOP; No. of Pins:16; Duty Cycle (%):50%; UVLO:6.25V; Frequency:580kHz; Operating Temperature Range:-40°C to 125°C; SVHC:No SVHC (19-Dec-2011); Base Number:5070; Continuous Drain Current Id:1mA; Controller Type:PWM; IC Generic Number:5070; Input Voltage Max:75V; Input Voltage Min:1.85V; Logic Function Number:5070; On Resistance Rds(on):1ohm; Operating Frequency:200Hz; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Output Type:Voltage; Output Voltage Max:3.3V; Package / Case:TSSOP; Power Supply IC Type:PoE and PWM; Startup Current:10µA; Supply Voltage Max:15V; Supply Voltage Min:8.1V; Termination Type:SMD
The LM5070 power interface port and pulse width modulation (PWM) controller provides a complete integrated solution for Powered Devices (PD) that connect into Power over Ethernet (PoE) systems. The LM5070 integrates an 80V, 400mA line connection switch and associated control for a fully IEEE 802.3af compliant interface with a full featured current mode pulse width modulator dc-dc converter. All power sequencing requirements between the controller interface and switch mode power supply (SMPS) are integrated into the IC. Two options are available providing either an 80% maximum duty cycle limit with slope compensation (on the -80 suffix) device or a 50% maximum duty cycle limit and no slope compensation on the (-50 suffix) device.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
06 September 2023
All You Need to Know About MPS2222A
Ⅰ. Overview of MPS2222AMPS2222A is an NPN transistor produced by Fairchild Semiconductor. Its main features include power dissipation of 0.625W; collector current of 0.6A; maximum withstand voltage of... -
06 September 2023
A4988 Characteristics, Application and Basic Principle
A4988 is an efficient and commonly used stepper motor driver chip, widely used in 3D printing and CNC machine tools and other fields. We will discuss in depth... -
07 September 2023
What Is The Difference Between NE5532 And RC4558D?
Ⅰ. Overview of NE5532NE5532 is a dual operational amplifier chip with excellent performance and low noise characteristics. Its circuit design is similar to that of a common operational... -
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.