Texas Instruments LM385M3X-1.2/NOPB
- Part Number:
- LM385M3X-1.2/NOPB
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3750582-LM385M3X-1.2/NOPB
- Description:
- 1.235-V, 0°C to 70°C, micropower voltage reference diode
- Datasheet:
- lm385-1.2-n
Texas Instruments LM385M3X-1.2/NOPB technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM385M3X-1.2/NOPB.
- Factory Lead Time6 Weeks
- Lifecycle StatusACTIVE (Last Updated: 2 days ago)
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / CaseTO-236-3, SC-59, SOT-23-3
- Number of Pins3
- Operating Temperature0°C~70°C TA
- PackagingTape & Reel (TR)
- Tolerance-2.43% 2.02%
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations3
- ECCN CodeEAR99
- Temperature Coefficient150ppm/°C
- Terminal FinishMatte Tin (Sn)
- SubcategoryVoltage References
- TechnologyBIPOLAR
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Terminal Pitch0.95mm
- Base Part NumberLM385
- Number of Outputs1
- Output Voltage1.235V
- Output TypeFixed
- Max Output Current20mA
- Number of Channels1
- Trim/Adjustable OutputNO
- Analog IC - Other TypeTWO TERMINAL VOLTAGE REFERENCE
- Nominal Supply Current10A
- Current - Output20mA
- Max Output Voltage1.235V
- Max Input Voltage1.235V
- Reference Voltage1.235V
- Reference TypeShunt
- Current - Cathode10μA
- Noise - 10Hz to 10kHz60μVrms
- Height1.22mm
- Length2.92mm
- Width1.3mm
- Thickness1mm
- Radiation HardeningNo
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
LM385M3X-1.2/NOPB Overview
This part is manufactured by Texas Instruments and falls under the category of PMIC - Voltage Reference chips. It is a surface mount with a package/case of TO-236-3, SC-59, SOT-23-3. The part is currently active and has a matte tin (Sn) terminal finish with a gull wing terminal form. It has one function and one channel, with an output voltage of 1.235V. The part is classified as a TWO TERMINAL VOLTAGE REFERENCE and has a thickness of 1mm.
LM385M3X-1.2/NOPB Features
-2.43% 2.02% Tolerance
TWO TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: 260
Channel Number: 1
Max Output Voltage: 1.235V
Reference Voltage: 1.235V
LM385M3X-1.2/NOPB Applications
There are a lot of Texas Instruments
LM385M3X-1.2/NOPB Voltage Reference applications.
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
and Digital-to-Analog Converters
High-Accuracy Reference Standard
High-Accuracy Industrial and Process Control
This part is manufactured by Texas Instruments and falls under the category of PMIC - Voltage Reference chips. It is a surface mount with a package/case of TO-236-3, SC-59, SOT-23-3. The part is currently active and has a matte tin (Sn) terminal finish with a gull wing terminal form. It has one function and one channel, with an output voltage of 1.235V. The part is classified as a TWO TERMINAL VOLTAGE REFERENCE and has a thickness of 1mm.
LM385M3X-1.2/NOPB Features
-2.43% 2.02% Tolerance
TWO TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: 260
Channel Number: 1
Max Output Voltage: 1.235V
Reference Voltage: 1.235V
LM385M3X-1.2/NOPB Applications
There are a lot of Texas Instruments
LM385M3X-1.2/NOPB Voltage Reference applications.
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
and Digital-to-Analog Converters
High-Accuracy Reference Standard
High-Accuracy Industrial and Process Control
LM385M3X-1.2/NOPB More Descriptions
1.235-V, 0°C to 70°C, micropower voltage reference diode 3-SOT-23 0 to 70
TEXAS INSTRUMENTS LM385M3X-1.2/NOPB. SHUNT V-REFERENCE, 1.235V, 2%, 3-SOT-23, FULL REEL
V-Ref Precision 1.235V 20mA 3-Pin SOT-23 T/R
Voltage Reference IC; Package/Case:SOT-23; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Reference Volt Tolerance ±%:2%; Reference Voltage:1.235V; Supply Current:10A; Temperature Coefficient:150ppm ;RoHS Compliant: Yes
The LM185-1.2/LM285-1.2/LM385-1.2 are micro power 2-terminal band-gap voltage regulator diodes. Operating over a 10uA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185-1.2 makes it useful for micro power circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185-1.2 is rated for operation over a -55*C to 125*C temperature range while the LM285-1.2 is rated -40*C to 85*C and the LM385-1.2 0*C to 70*C. The LM185-1.2/ LM285-1.2 are available in a hermetic TO-46 package and the LM285-1.2/LM385-1.2 are also available in a low-cost TO-92 molded package, as well as SO and SOT-23. The LM185-1.2 is also available in a hermetic leadless chip carrier package.
TEXAS INSTRUMENTS LM385M3X-1.2/NOPB. SHUNT V-REFERENCE, 1.235V, 2%, 3-SOT-23, FULL REEL
V-Ref Precision 1.235V 20mA 3-Pin SOT-23 T/R
Voltage Reference IC; Package/Case:SOT-23; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Reference Volt Tolerance ±%:2%; Reference Voltage:1.235V; Supply Current:10A; Temperature Coefficient:150ppm ;RoHS Compliant: Yes
The LM185-1.2/LM285-1.2/LM385-1.2 are micro power 2-terminal band-gap voltage regulator diodes. Operating over a 10uA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185-1.2 makes it useful for micro power circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185-1.2 is rated for operation over a -55*C to 125*C temperature range while the LM285-1.2 is rated -40*C to 85*C and the LM385-1.2 0*C to 70*C. The LM185-1.2/ LM285-1.2 are available in a hermetic TO-46 package and the LM285-1.2/LM385-1.2 are also available in a low-cost TO-92 molded package, as well as SO and SOT-23. The LM185-1.2 is also available in a hermetic leadless chip carrier package.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
06 November 2023
An Introduction to the LM339AN Quad Voltage Comparator
Ⅰ. What is a comparator?Ⅱ. Overview of LM339AN comparatorⅢ. LM339AN symbol, footprint and pin configurationⅣ. What are the features of LM339AN comparator?Ⅴ. Technical parameters of LM339AN comparatorⅥ. Applications... -
07 November 2023
TLP250 MOSFET IGBT Driver: Manufacturer, Footprint and Applications
Ⅰ. Overview of TLP250Ⅱ. Manufacturer of TLP250Ⅲ. TLP250 symbol, footprint and pin configurationⅣ. What are the features of TLP250?Ⅴ. Technical parameters of TLP250Ⅵ. How to use TLP250 isolated... -
07 November 2023
LM2596 Voltage Regulator: Equivalents, Features, Structure and Applications
Ⅰ. What is a voltage regulator?Ⅱ. Overview of LM2596 voltage regulatorⅢ. Features of LM2596 voltage regulatorⅣ. Pin configuration of LM2596 voltage regulatorⅤ. Structure of LM2596 voltage regulatorⅥ. LM2596... -
08 November 2023
What is MOC3021 Optocoupler Triac Driver?
Ⅰ. What is an optocoupler?Ⅱ. Overview of MOC3021 optocouplerⅢ. Pin configuration of MOC3021 optocouplerⅣ. Features of MOC3021 optocouplerⅤ. Technical parameters of MOC3021 optocouplerⅥ. Working principle of MOC3021 optocouplerⅦ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.