Texas Instruments LM285M-1.2/NOPB
- Part Number:
- LM285M-1.2/NOPB
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3284749-LM285M-1.2/NOPB
- Description:
- 1.235-V, –40°C to 85°C, micropower voltage reference diode
- Datasheet:
- lm285-1.2-n
Texas Instruments LM285M-1.2/NOPB technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM285M-1.2/NOPB.
- Factory Lead Time6 Weeks
- Lifecycle StatusACTIVE (Last Updated: 2 days ago)
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case8-SOIC (0.154, 3.90mm Width)
- Number of Pins8
- Operating Temperature-40°C~85°C TA
- PackagingTube
- Tolerance±1%
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- TerminationSMD/SMT
- ECCN CodeEAR99
- Temperature Coefficient150ppm/°C
- Terminal FinishMatte Tin (Sn)
- SubcategoryVoltage References
- TechnologyBIPOLAR
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Current Rating10A
- Base Part NumberLM285
- Pin Count8
- Number of Outputs1
- Output Voltage1.235V
- Output TypeFixed
- Max Output Current20mA
- Number of Channels1
- Trim/Adjustable OutputNO
- Analog IC - Other TypeTWO TERMINAL VOLTAGE REFERENCE
- Nominal Supply Current10mA
- Max Output Voltage1.235V
- Reference Voltage1.235V
- Reference TypeShunt
- Current - Cathode10μA
- Noise - 10Hz to 10kHz60μVrms
- Height1.75mm
- Length4.9mm
- Width3.91mm
- Thickness1.58mm
- Radiation HardeningNo
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
LM285M-1.2/NOPB Overview
The manufacturer of this component is Texas Instruments. It is a Power Management Integrated Circuit (PMIC) that falls under the category of Voltage Reference chips. Its current Lifecycle Status is ACTIVE and was last updated 2 days ago. It is designed to be mounted on the surface of a circuit board and has an 8-SOIC package with a width of 0.154 inches (3.90mm). The component is packaged in a tube and is free of lead (Pbfree). It is terminated using Surface Mount Technology (SMT). This chip has one function and is classified as an Analog Integrated Circuit (IC) of the "Other Type" category. It has a noise level of 60μVrms in the frequency range of 10Hz to 10kHz. This component is not designed for radiation hardening.
LM285M-1.2/NOPB Features
±1% Tolerance
TWO TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: 260
Channel Number: 1
Reference Voltage: 1.235V
LM285M-1.2/NOPB Applications
There are a lot of Texas Instruments
LM285M-1.2/NOPB Voltage Reference applications.
Automotive
3 V/5 V, 8-bit to 12-bit data converters
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
The manufacturer of this component is Texas Instruments. It is a Power Management Integrated Circuit (PMIC) that falls under the category of Voltage Reference chips. Its current Lifecycle Status is ACTIVE and was last updated 2 days ago. It is designed to be mounted on the surface of a circuit board and has an 8-SOIC package with a width of 0.154 inches (3.90mm). The component is packaged in a tube and is free of lead (Pbfree). It is terminated using Surface Mount Technology (SMT). This chip has one function and is classified as an Analog Integrated Circuit (IC) of the "Other Type" category. It has a noise level of 60μVrms in the frequency range of 10Hz to 10kHz. This component is not designed for radiation hardening.
LM285M-1.2/NOPB Features
±1% Tolerance
TWO TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: 260
Channel Number: 1
Reference Voltage: 1.235V
LM285M-1.2/NOPB Applications
There are a lot of Texas Instruments
LM285M-1.2/NOPB Voltage Reference applications.
Automotive
3 V/5 V, 8-bit to 12-bit data converters
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Notebook Computers
Cell Phones
Industrial Process Control
High-Resolution Analog-to-Digital
LM285M-1.2/NOPB More Descriptions
1.235-V, –40°C to 85°C, micropower voltage reference diode 8-SOIC -40 to 85
V-Ref Precision 1.235V 20mA 8-Pin SOIC N Rail
Voltage Reference; Package/Case:8-SOIC-NARROW; No. of Pins:8; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Current Rating:10A; Mounting Type:Surface Mount; Reference Volt Tolerance ± mV:20mV ;RoHS Compliant: Yes
IC, SM, SHUNT, VOLT REF, 1.235V; Topology:Shunt; Reference Voltage:1.235V; Reference Voltage Tolerance:1mV; Temperature Coefficient:150ppm/°C; Voltage Reference Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-40°C to 85°C; SVHC:No SVHC (19-Dec-2011); Base Number:285; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Current Max:20mA; Package / Case:SOIC; Reference Voltage & Age Tolerance:2%; Temperature Coeff. :150ppm/°C; Termination Type:SMD; Voltage Regulator Type:Shunt, Adjustable
The LM185-1.2/LM285-1.2/LM385-1.2 are micro power 2-terminal band-gap voltage regulator diodes. Operating over a 10uA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185-1.2 makes it useful for micro power circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185-1.2 is rated for operation over a -55*C to 125*C temperature range while the LM285-1.2 is rated -40*C to 85*C and the LM385-1.2 0*C to 70*C. The LM185-1.2/ LM285-1.2 are available in a hermetic TO-46 package and the LM285-1.2/LM385-1.2 are also available in a low-cost TO-92 molded package, as well as SO and SOT-23. The LM185-1.2 is also available in a hermetic leadless chip carrier package.
V-Ref Precision 1.235V 20mA 8-Pin SOIC N Rail
Voltage Reference; Package/Case:8-SOIC-NARROW; No. of Pins:8; Leaded Process Compatible:Yes; Peak Reflow Compatible (260 C):Yes; Current Rating:10A; Mounting Type:Surface Mount; Reference Volt Tolerance ± mV:20mV ;RoHS Compliant: Yes
IC, SM, SHUNT, VOLT REF, 1.235V; Topology:Shunt; Reference Voltage:1.235V; Reference Voltage Tolerance:1mV; Temperature Coefficient:150ppm/°C; Voltage Reference Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-40°C to 85°C; SVHC:No SVHC (19-Dec-2011); Base Number:285; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Current Max:20mA; Package / Case:SOIC; Reference Voltage & Age Tolerance:2%; Temperature Coeff. :150ppm/°C; Termination Type:SMD; Voltage Regulator Type:Shunt, Adjustable
The LM185-1.2/LM285-1.2/LM385-1.2 are micro power 2-terminal band-gap voltage regulator diodes. Operating over a 10uA to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185-1.2 band-gap reference uses only transistors and resistors, low noise and good long term stability result. Careful design of the LM185-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the LM185-1.2 makes it useful for micro power circuitry. This voltage reference can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part. The LM185-1.2 is rated for operation over a -55*C to 125*C temperature range while the LM285-1.2 is rated -40*C to 85*C and the LM385-1.2 0*C to 70*C. The LM185-1.2/ LM285-1.2 are available in a hermetic TO-46 package and the LM285-1.2/LM385-1.2 are also available in a low-cost TO-92 molded package, as well as SO and SOT-23. The LM185-1.2 is also available in a hermetic leadless chip carrier package.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
10 January 2024
KSZ8999I: The Leader in High Performance Ethernet Switches
Ⅰ. Overview of KSZ8999IⅡ. What are the features of KSZ8999I?Ⅲ. What are the purpose of KSZ8999I?Ⅳ. Specifications of KSZ8999IⅤ. How to use KSZ8999I?Ⅵ. What problems may occur when... -
10 January 2024
What Is the BTS6143D and How Does It Work?
Ⅰ. Introduction to BTS6143DⅡ. How does BTS6143D work?Ⅲ. Technical parameters of BTS6143DⅣ. Package of BTS6143DⅤ. What are the advantages of BTS6143D?Ⅵ. How is the protection function of BTS6143D... -
11 January 2024
MT3608 Converter Manufacturer, Working Principle and Applications
Ⅰ. MT3608 descriptionⅡ. Who is the manufacturer of MT3608?Ⅲ. Specifications of MT3608Ⅳ. MT3608 symbol, footprint and pin configurationⅤ. What are the advantages and disadvantages of MT3608?Ⅵ. Working principle... -
11 January 2024
78L05 Voltage Regulator Characteristics, Applications, 78L05 vs 7805 and More
Ⅰ. Overview of 78L05Ⅱ. What are the characteristics of 78L05?Ⅲ. Technical parameters of 78L05Ⅳ. Working principle of 78L05Ⅴ. Where is 78L05 used?Ⅵ. Application circuit of 78L05 voltage regulatorⅦ....
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.