Infineon Technologies IR21362JTR

J BEND RoHS Compliant Discontinued Tin/Lead (Sn/Pb) IC Gate Driver 1.27mm 11.5/20V 125C
3 Phase Driver, Soft Turn-on, Non-inverting Input Separate High and Low Side Inputs, 200ns Deadtime.
MOSFET DRVR 600V 6-OUT Hi/Lo Side 3-Phase Brdg Inv 32-Pin PLCC T/R
IC GATE DRVR HALF-BRIDGE 44PLCC
The IR2136/IR21362/IR21363/IR21365/IR21366/IR21367/IR21368(J&S) are high votage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an over current or under voltage shutdown has occurred. Over current fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts.