Honeywell Sensing and Productivity Solutions HSCDAND015PG2A3
- Part Number:
- HSCDAND015PG2A3
- Manufacturer:
- Honeywell Sensing and Productivity Solutions
- Ventron No:
- 4863224-HSCDAND015PG2A3
- Description:
- SENSOR PRES 15PSI GAUG 3.3V DIP
- Datasheet:
- HSC Series Datasheet~
Honeywell Sensing and Productivity Solutions HSCDAND015PG2A3 technical specifications, attributes, parameters and parts with similar specifications to Honeywell Sensing and Productivity Solutions HSCDAND015PG2A3.
- Factory Lead Time7 Weeks
- MountThrough Hole
- Package / Case8-DIP (0.524, 13.30mm), Top Port
- Number of Pins8
- Operating Temperature-20°C~85°C
- SeriesTruStability® HSC
- Published2011
- FeatureAmplified Output, Temperature Compensated
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- TerminationPC Pin
- ApplicationsBoard Mount
- Voltage - Rated DC3.3V
- Voltage - Supply3V~3.6V
- Output12 b
- Termination StylePC Pin
- Body Length or Diameter12.45mm
- Body Breadth9.91 mm
- Output TypeI2C
- Operating Supply Voltage3.3V
- Nominal Supply Current1.6mA
- Max Supply Current2.1mA
- Number of Bits12
- Accuracy±0.25%
- Response Time1 ms
- Operating Pressure15PSI (103.42kPa)
- Pressure TypeVented Gauge
- Port StyleBarbed
- Port SizeMale - 0.19 4.93mm Tube
- Maximum Pressure30PSI (206.84kPa)
- Sensors/Transducers TypePRESSURE SENSOR,PEIZORESISTIVE
- HousingCERAMIC
- Pressure Range-Max15 Psi
- Pressure Sensing ModeGAGE
- RoHS StatusRoHS Compliant
HSCDAND015PG2A3 Overview
This transducer is included in the package 8-DIP (0.524, 13.30mm), Top Port. Ensure reliable performance by setting the transducers' temperature to -20°C~85°C. It is possible to use the transducers with a supply voltage of 3V~3.6V without any problems. Transducers need to be connected to 8 pins in order to function properly. This transducer can measure pressures up to 15 Psi. When the nominal supply current is 1.6mA, the transducers can operate normally. Transducers should receive a DC voltage of 3.3V in order to maintain the rated ambient temperature continuously. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
HSCDAND015PG2A3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-DIP (0.524, 13.30mm), Top Port
Operating Temperature: -20°C~85°C
8 Pins
TruStability® HSC series
Operating Pressure: 15PSI (103.42kPa)
Operating Supply Voltage: 3.3V
HSCDAND015PG2A3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
HSCDAND015PG2A3 Transducers applications.
Altitude Control of Drones and Flying Toys
Mobile Phones
Virtual Reality and Gaming Equipment
Indoor/Outdoor Navigation (dead-reckoning, floor/elevator/step detection)
Vertical velocity monitoring
Leisure, Sports, and Fitness Activity Identification
Weather Forecasting
Hydrogen Storage
Refrigerant pressure monitoring in HVAC/R systems
Dry air system pressure, process controls and automation
This transducer is included in the package 8-DIP (0.524, 13.30mm), Top Port. Ensure reliable performance by setting the transducers' temperature to -20°C~85°C. It is possible to use the transducers with a supply voltage of 3V~3.6V without any problems. Transducers need to be connected to 8 pins in order to function properly. This transducer can measure pressures up to 15 Psi. When the nominal supply current is 1.6mA, the transducers can operate normally. Transducers should receive a DC voltage of 3.3V in order to maintain the rated ambient temperature continuously. The current of the transducers should not exceed 2.1mA, otherwise it will be dangerous.
HSCDAND015PG2A3 Features
Moisture Sensitivity Level: 1 (Unlimited)
Package / Case: 8-DIP (0.524, 13.30mm), Top Port
Operating Temperature: -20°C~85°C
8 Pins
TruStability® HSC series
Operating Pressure: 15PSI (103.42kPa)
Operating Supply Voltage: 3.3V
HSCDAND015PG2A3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions
HSCDAND015PG2A3 Transducers applications.
Altitude Control of Drones and Flying Toys
Mobile Phones
Virtual Reality and Gaming Equipment
Indoor/Outdoor Navigation (dead-reckoning, floor/elevator/step detection)
Vertical velocity monitoring
Leisure, Sports, and Fitness Activity Identification
Weather Forecasting
Hydrogen Storage
Refrigerant pressure monitoring in HVAC/R systems
Dry air system pressure, process controls and automation
HSCDAND015PG2A3 More Descriptions
Board Mount Pressure Sensors DIP,Single Ax Barbed Gage, 3.3V
SENSOR 15PSIG 0.19" 12BIT 8DIP
TruStability™ HSC Series-High Accuracy, digital I²C address: 0x28, DIP AN: single axial barbed port, gage, 0 psi to 15 psi, 3.3 Vdc, dry gases only, diagnostics on The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The HSC Series is calibrated over the temperature range of 0°C to 50°C [32°F to 122°F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.
SENSOR 15PSIG 0.19" 12BIT 8DIP
TruStability™ HSC Series-High Accuracy, digital I²C address: 0x28, DIP AN: single axial barbed port, gage, 0 psi to 15 psi, 3.3 Vdc, dry gases only, diagnostics on The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The HSC Series is calibrated over the temperature range of 0°C to 50°C [32°F to 122°F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.
The three parts on the right have similar specifications to HSCDAND015PG2A3.
-
ImagePart NumberManufacturerFactory Lead TimeMountPackage / CaseNumber of PinsOperating TemperatureSeriesPublishedFeaturePbfree CodePart StatusMoisture Sensitivity Level (MSL)TerminationApplicationsVoltage - Rated DCVoltage - SupplyOutputTermination StyleBody Length or DiameterBody BreadthOutput TypeOperating Supply VoltageNominal Supply CurrentMax Supply CurrentNumber of BitsAccuracyResponse TimeOperating PressurePressure TypePort StylePort SizeMaximum PressureSensors/Transducers TypeHousingPressure Range-MaxPressure Sensing ModeRoHS StatusSurface MountMounting FeatureReach Compliance CodeAdditional FeatureBody HeightView Compare
-
HSCDAND015PG2A37 WeeksThrough Hole8-DIP (0.524, 13.30mm), Top Port8-20°C~85°CTruStability® HSC2011Amplified Output, Temperature CompensatedyesActive1 (Unlimited)PC PinBoard Mount3.3V3V~3.6V12 bPC Pin12.45mm9.91 mmI2C3.3V1.6mA2.1mA12±0.25%1 ms15PSI (103.42kPa)Vented GaugeBarbedMale - 0.19 4.93mm Tube30PSI (206.84kPa)PRESSURE SENSOR,PEIZORESISTIVECERAMIC15 PsiGAGERoHS Compliant------
-
10 Weeks-8-DIP (0.524, 13.30mm), Top Port8-20°C~85°CTruStability® HSC2011Amplified Output, Temperature CompensatedyesActive1 (Unlimited)-Board Mount-3V~3.6V12 bPC Pin12.45mm9.91 mmSPI3.3V-2.1mA12±0.25%460 μs100PSI (689.48kPa)Vented GaugeBarbedMale - 0.19 4.93mm Tube250PSI (1723.69kPa)PRESSURE SENSOR,PEIZORESISTIVECERAMIC100 PsiGAGERoHS CompliantNOTHROUGH HOLE MOUNTunknown--
-
10 Weeks-8-DIP (0.524, 13.30mm), Top Port--20°C~85°CTruStability® HSC2011Amplified Output, Temperature CompensatedyesActive1 (Unlimited)-Board Mount-4.75V~5.25V0.5 V ~ 4.5 VPC Pin13.35mm9.91 mmAnalog Voltage---12±0.25%1000 μs3.63PSI (25kPa)Vented GaugeBarbedMale - 0.19 4.93mm Tube20.31PSI (140kPa)PRESSURE SENSOR,PEIZORESISTIVECERAMIC3.62 PsiABSOLUTERoHS CompliantNOTHROUGH HOLE MOUNTunknownTEMPERATURE COMPENSATED OVER 0 TO 50 DEG13.85mm
-
10 Weeks-8-DIP (0.524, 13.30mm), Top Port--20°C~85°CTruStability® HSC2011Amplified Output, Temperature CompensatedyesActive1 (Unlimited)-Board Mount-4.75V~5.25V0.5 V ~ 4.5 VPC Pin--Analog Voltage----±0.25%-±87.02PSI (±600kPa)DifferentialBarbedMale - 0.19 4.93mm Tube±246.56PSI (±1700kPa)PRESSURE SENSOR,PEIZORESISTIVE---RoHS Compliant--unknown--
Popular Search Part Number
Related Keywords
Search Tags
- P51-3000-S-Y-M12-5V-000-000
- P51-75-S-S-M12-5V-000-000
- P51-75-S-H-M12-5V-000-000
- P51-100-S-P-M12-4.5OVP-000-000
- P51-750-S-Y-M12-4.5OVP-000-000
- P51-1000-S-F-M12-4.5OVP-000-000
- P51-100-S-H-M12-4.5OVP-000-000
- P51-75-S-D-M12-4.5OVP-000-000
- P51-1500-S-A-M12-4.5OVP-000-000
- P51-1500-S-Y-M12-4.5V-000-000
- P51-100-S-S-M12-4.5V-000-000
- P51-3000-S-B-M12-4.5OVP-000-000
- P51-1500-S-H-M12-4.5V-000-000
- P51-1000-S-J-M12-4.5V-000-000
- P51-1500-S-B-M12-4.5V-000-000
Latest News
-
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used... -
12 September 2023
The Difference Between L293D and L298N
In this article we will explore the main differences between the L293D and L298N motor drivers. Both motor drives have their own unique features and applications. Understanding the... -
12 September 2023
Comprehensive Analysis of CR123A battery: Features, Applications and Purchase
Ⅰ. CR123A overviewThe CR123A battery, classified under the non-rechargeable (primary) category, is a high-performance power source with distinct specifications. Featuring a robust lithium manganese composition, it boasts a... -
13 September 2023
AT89S52-24PU Microcontroller Equivalent, Features and Working Principle
Ⅰ. AT89S52-24PU overviewAT89S52 is a low-voltage, high-performance 8-bit CMOS microcontroller with 8K bytes of in-circuit programmable flash memory (ISP). AT89S52 is a high-density non-volatile memory compatible with the...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.