Home > Products > Integrated Circuits (ICs) > Interface - Analog Switches, Multiplexers, Demultiplexers > HCF4052M013TR
HCF4052M013TR

STMicroelectronics HCF4052M013TR

Part Number:
HCF4052M013TR
Manufacturer:
STMicroelectronics
Ventron No:
3166286-HCF4052M013TR
Description:
IC MUX/DEMUX DUAL 4X1 16SOIC
ECAD Model:
Datasheet:
HCF4052B

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
STMicroelectronics HCF4052M013TR technical specifications, attributes, parameters and parts with similar specifications to STMicroelectronics HCF4052M013TR.
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    16-SOIC (0.154, 3.90mm Width)
  • Number of Pins
    16
  • Operating Temperature
    -55°C~125°C TA
  • Packaging
    Tape & Reel (TR)
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    16
  • Resistance
    1.05kOhm
  • Terminal Finish
    Nickel/Palladium/Gold (Ni/Pd/Au)
  • Subcategory
    Multiplexer or Switches
  • Max Power Dissipation
    500mW
  • Technology
    MOS
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Reflow Temperature-Max (s)
    30
  • Base Part Number
    HCF4052
  • Pin Count
    16
  • Polarity
    Non-Inverting
  • Power Supplies
    5/15V
  • Number of Channels
    4
  • Number of Circuits
    2
  • Max Supply Voltage
    20V
  • Min Supply Voltage
    3V
  • Analog IC - Other Type
    DIFFERENTIAL MULTIPLEXER
  • Operating Supply Current
    80nA
  • Power Dissipation
    500mW
  • Propagation Delay
    60 ns
  • Quiescent Current
    80nA
  • Turn On Delay Time
    720 ns
  • Logic Function
    Demultiplexer, Demux, Multiplexer, Mux
  • Number of Inputs
    8
  • Supply Type
    Dual
  • Bandwidth
    60MHz
  • Supply Current-Max (Isup)
    3mA
  • Turn-Off Delay Time
    450 ns
  • On-State Resistance (Max)
    280Ohm
  • Multiplexer/Demultiplexer Circuit
    4:1
  • Current - Leakage (IS(off)) (Max)
    100nA
  • Channel Capacitance (CS(off), CD(off))
    0.2pF 5pF
  • On-state Resistance Match-Nom
    10Ohm
  • Switch Circuit
    SP4T
  • Channel-to-Channel Matching (ΔRon)
    5 Ω
  • Crosstalk
    -40dB @ 10MHz
  • Switching
    BREAK-BEFORE-MAKE
  • Voltage - Supply, Single (V )
    3V~20V
  • Drain to Source Resistance
    1.05kOhm
  • Signal Current-Max
    0.01A
  • Height
    1.65mm
  • Length
    10mm
  • Width
    4mm
  • Radiation Hardening
    No
  • REACH SVHC
    Unknown
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
HCF4052M013TR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. Using the HCF4052 search parameter, you can discover variants of the switch. It has an internal resistance of 1.05kOhm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 20V volts for the multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. 80nA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 3V~20V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. The electrical component supports 8 inputs. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 1.05kOhm for this electronic part.

HCF4052M013TR Features
4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 60MHz
Drain-to-Source resistance: 1.05kOhm

HCF4052M013TR Applications
There are a lot of STMicroelectronics HCF4052M013TR Analog Switches & Multiplexers ICs applications.

Video signal routing
Industrial
Channel Banks
FTTH
ISDN NT1/TA
PDAs
Audio/video switches
Video switching
Battery Powered Systems
Sample hold systems
HCF4052M013TR More Descriptions
Analog Multiplexer Dual 4:1 16-Pin SOP T/R / IC MUX/DEMUX DUAL 4X1 16SOIC
MUX / DEMUX, 4CH, 20V, 120R, 16SOIC; No. of Circuits:2; Supply Current:80nA; On State Resistance Max:1.05kohm; Supply Voltage Range:3V to 20V; Analogue Switch Case Style:SOIC; No. of Pins:16; Multiplexer Configuration:4:1; Operating Temperature Range:-55°C to 125°C; MSL:MSL 1 - Unlimited; SVHC:No SVHC (18-Jun-2012)
Analog Multiplexer/Demultiplexer; Logic Type:Multiplexer/Demultiplexer; Logic Family:HC; Logic Base Number:4052; On Resistance, Rds(on):125ohm; No. of Outputs:8; Supply Voltage Min:3V; Supply Voltage Max:20V; Termination Type:SMD ;RoHS Compliant: Yes
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS
Popular Search Part Number Related Keywords Search Tags

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.