Fairchild/ON Semiconductor FSA5157L6X

Name: FSA5157L6X
Brand: Fairchild/ON Semiconductor
SKU: 3164982-FSA5157L6X
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: FSA5157L6X

Manufacturer:: Fairchild/ON Semiconductor

Ventron No:: 3164982-FSA5157L6X

Description:: IC SWITCH SPDT 6MICROPAK

ECAD Model:

Datasheet:: FSA5157L6X

Specifications

Fairchild/ON Semiconductor FSA5157L6X technical specifications, attributes, parameters and parts with similar specifications to Fairchild/ON Semiconductor FSA5157L6X.

Factory Lead Time
5 Weeks
Lifecycle Status
ACTIVE (Last Updated: 3 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
6-UFDFN
Number of Pins
6
Weight
30g
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2008
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
ECCN Code
EAR99
Resistance
360mOhm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Max Power Dissipation
180mW
Technology
CMOS
Terminal Position
DUAL
Number of Functions
1
Supply Voltage
2.3V
Terminal Pitch
0.5mm
Base Part Number
FSA5157
Output
SEPARATE OUTPUT
Number of Channels
1
Max Supply Voltage
3.6V
Min Supply Voltage
1.65V
Nominal Supply Current
30nA
Power Dissipation
180mW
Max Supply Current
100nA
Number of Bits
2
Turn On Delay Time
70 ns
Number of Inputs
1
Supply Type
Single
Bandwidth
80MHz
Turn-Off Delay Time
40 ns
On-State Resistance (Max)
360mOhm Typ
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
75 dB
Current - Leakage (IS(off)) (Max)
10nA
Channel Capacitance (CS(off), CD(off))
21pF
On-state Resistance Match-Nom
0.12Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
55ns, 30ns
Charge Injection
6pC
Channel-to-Channel Matching (ΔRon)
40m Ω
Crosstalk
-75dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Voltage - Supply, Single (V )
1.65V~4.3V
Height
500μm
Length
1.45mm
Width
1mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free

Description

FSA5157L6X Overview
The electrical component comes in 6-UFDFN packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there have been 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 2.3V voltage supply should turn on and run the electronic component. A SPDT switching circuit is used for these analog switches. FSA5157 can be used to search for analog multiplexer variants. It has an internal resistance of 360mOhm. The functions of 6 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. 1.65V should be the lowest voltage fed to the electronic component. Using only a single voltage supply, this analog switch requires 1.65V~4.3V voltage. The analogue multiplexer may be damaged if voltage is greater than 100nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The 1 inputs need to be operated in order to work. 80MHz bandwidths enable data to be transferred. The switch device is capable of conducting in a 2-bit mode.

FSA5157L6X Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 80MHz
2-Bit

FSA5157L6X Applications
There are a lot of ON Semiconductor FSA5157L6X Analog Switches & Multiplexers ICs applications.

ISDN NT1/TA
Data Acquisition Systems
Channel Banks
Voice over IP/DSL – Integrated Access Devices, Smart
SDH
Fiber to the Home
Avionics test equipment
Video signal routing
Private Branch Exchange (PBX)
Automotive applications

FSA5157L6X More Descriptions

FSA Series SPDT 4.3 V 0.4 Ohm SMT Low Voltage Analog Switch - MicroPak-6
Analog SW Single SPDT 4.3V 6-Pin MicroPak W T/R
ANALOGUE SWITCH, -40 TO 85DEG C;
IC SW SPDTX1 360MOHM 6MICROPAK
The FSA5157 is a low on resistance, low-power, Single Pole Double Throw (SPDT) analog switch. This product has been designed for switching audio signals in applications such as cell phones and portable media players. The ultra-low 0.4Ω impedance, sub 1µA current consumption, and 1.65V to 4.3V operating voltage range makes this product ideal for battery-powered applications. The FSA5157 also features bi-directional operation and break-before-make functionality. This device is fully specified for operation at 1.8V, 2.5V and 3.3V. A growing number of applications require the voltage applied to the select input to be lower than the VCC applied. Under this condition, most switches would typically consume over 100µA of current. This would be an unacceptable level for battery-powered applications. The FSA5157 is designed to minimize current consumption under this condition. The ICCT is specified for <12µA under a worst-case condition of VCC = 4.3V and VIN = 1.8V.

Certification