Vishay Semiconductor Opto Division BP104

BP104 Overview
A Bulk package protects these photodiodes from damage. In order to ensure their safety, the photodiodes are packaged into 2-DIP (0.200, 5.10mm) packages. A photodiode can withstand a maximum voltage of 60V when operating in reverse-bias mode continuously. Reverse-bias photodiodes should not be operated above 60V permanently. A photodiode is equipped with 2 pins. A circuit made up of photodiodes could release heat 215mW. While operating photodiodes, the temperature should not exceed 100°C. However, the minimum operating temperature for the photodiodes should be set at -40°C. It is recommended that the reverse anode voltage on the photodiodes be 60V. It is generally recommended that the maximum heat released by photodiodes should be 215mW in a circuit. If the reverse voltage is set to 60V, the photodiodes can work effectively. Make sure photodiodes work with 60V breakdown voltage. Without light input, a photodiode will produce 2nA current.

BP104 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 870nm ~ 1050nm
Viewing Angle: 130°


BP104 Applications
There are a lot of Vishay Semiconductor Opto Division
BP104 Photodiodes applications.


Vision Controls
Measurement Levelling
High speed photo detectors
Health Monitoring
Heart Rate Monitoring
Pulse Oximetry
Pure UV-C Monitoring
Sterilization Lamp Monitoring
Optical Analytics
Optical Switches