OSRAM Opto Semiconductors Inc. BP104FS

BP104FS Overview
Cut Tape (CT) is used to protect the photodiodes from damage. A safety package containing the photodiodes is provided for their protection. When photodiodes are continuously reverse-biased, the maximum voltage they can withstand is 20V. When the photodiodes are reverse-biased, the voltage should never exceed 20V. A photodiode has a pin number of 2. There was the possibility that photodiodes in a circuit would emit 150mW heat. When photodiodes operate, they should not be subjected to temperatures higher than 100°C. It should be noted that the photodiodes should be operated at -40°C as a minimum operating temperature. The reverse anode voltage for the photodiodes should be 20V. In order for a photodiode to pass current, you need a voltage of 1.3V. The current in a photodiode is 2nA even when there is no light input.

BP104FS Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Cut Tape (CT)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 800nm ~ 1100nm
Response Time: 20ns
Viewing Angle: 120°


BP104FS Applications
There are a lot of OSRAM Opto Semiconductors Inc.
BP104FS Photodiodes applications.


Shaft encoders
Electronic Equipment
Industrial Automation
Machine Controls
Light Barriers
Vision Controls
Measurement Levelling
High speed photo detectors
Health Monitoring
Heart Rate Monitoring